|
|
|
2010 2011 BMW 5 Series Forum F10 F10 535i ZGM Coding Issues |
|
Post Reply |
|
Thread Tools | Search this Thread |
02-28-2014, 01:25 PM | #1 |
Sleeper (;
24
Rep 146
Posts |
F10 535i ZGM Coding Issues
Featured on BIMMERPOST.com When i restart the coding process all over again, now ignition isn't coming on, Terminal 15 Displays (0 Volts). I was doing research and somehow my 'ZGM Module' is not sending Voltage to 'CAS' Is there a way i can send Volts manually to the 'CAS/ZGM' Module so i can continue the coding process? What might have caused this problem? Or the ignition to shut off during coding? Im using 'ICOM A2'
__________________
Follow Me On Instagram , Ill Follow you back!
IG = @isteeze |
02-28-2014, 04:26 PM | #2 |
6'0 / 250lb
137
Rep 1,797
Posts |
Exactly what I'd be afraid of and why I'm not messing with this coding on my own. These cars are 100% controlled by software. You can easily get into this exact situation.
Best of luck. Isn't there a forum on Bimmerfest dedicated to coding....?
__________________
Build: '14 M5 - Space Gray / Full Sakhir Orange / Alum Trace / Black 343's / Exec / Driver Assist / LED
Mods: SunTek CXP tint - Vinyl-wrapped door handle chrome - Macht Schnell 12mm spacers - Pedalhaus pedals - iND Cosmetic Package - Polished 90mm exh tips - Coded by v12 - 21" HRE S107's polished lip/black center |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|