|
|
|
2010 2011 BMW 5 Series Forum F10 21" wheels and tires for sale |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-19-2015, 10:38 AM | #1 |
mrainv23
30
Rep 224
Posts |
21" wheels and tires for sale
__________________
2014 BMW M6 Gran Coupe F06/M Performance Black Grille/20% Tint/ Exec Package/ Driver Assist Plus/ Black on Black
Sold-BMW 550i F10/Dinan S3/ Eisenmann Race Exhaust/ Vossen CV3s |
06-19-2015, 05:01 PM | #2 |
Lieutenant General
9153
Rep 14,522
Posts |
Wondering because these were on an M6 these are pretty wide tires...will they fit on a 5 series with no rubbing? I was planning on ordering the same wheels and size except in matte antique bronze finish but black would have been an alternative. tires would be 255's and 295''s. Are the front wheels concave or flat?
|
Appreciate
0
|
06-19-2015, 06:03 PM | #3 |
mrainv23
30
Rep 224
Posts |
Front are flat face not very concave at all. The rest are concave. I am also running 15mm spacers in the rear. Call Need4speed motorsports to confirm fitment. Offset is +25.
__________________
2014 BMW M6 Gran Coupe F06/M Performance Black Grille/20% Tint/ Exec Package/ Driver Assist Plus/ Black on Black
Sold-BMW 550i F10/Dinan S3/ Eisenmann Race Exhaust/ Vossen CV3s |
Appreciate
0
|
07-01-2015, 05:58 PM | #4 | |
Private First Class
11
Rep 139
Posts |
Quote:
|
|
Appreciate
0
|
07-01-2015, 10:31 PM | #6 |
Lieutenant General
9153
Rep 14,522
Posts |
|
Appreciate
0
|
07-04-2015, 06:45 AM | #7 |
mrainv23
30
Rep 224
Posts |
Offset is +25 so they are tucked in a bit. You can always roll your fenders in the rear. Camber that exists also helps a bit.
Plug the numbers into www.willtheyfit.com and you will have your answer.
__________________
2014 BMW M6 Gran Coupe F06/M Performance Black Grille/20% Tint/ Exec Package/ Driver Assist Plus/ Black on Black
Sold-BMW 550i F10/Dinan S3/ Eisenmann Race Exhaust/ Vossen CV3s |
Appreciate
0
|
07-04-2015, 09:46 AM | #8 |
Lieutenant General
9153
Rep 14,522
Posts |
Here's what I got for the fronts.
Compared to your existing wheel, this new wheel will have an inner rim which is*31.4mm closer to the suspension strut. The outer rim will poke out*18.7mm less than before. The strut shown in the diagram is for show only. Don't worry if the wheel looks like it fouls! Diameter old 631.9mm new 645.2mm Circumference old 1985.2mm new 2027mm Poke old 42.6mm new 100.7mm Inset old 122.6mm new 140.7mm Speedo error old 0% new -2.06% Reading at 30mph old 30mph new 29.38mph Ride height gain old 0mm new 6.65mm Arch gap loss old 0mm new 6.65mm Last edited by lsturbointeg; 07-04-2015 at 10:04 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|