[westb]

2014 535i xDrive Luxury Line
My first mod....more to come

[550toronto]

Sweet! I have the same in black, with the ball cut on my 550

[bake]

You will need coilovers and be willing to dial them way down in order to be able to pull of 22" wheels on an F10. Wheel design isn't bad though.

[MELLOWYELLOW06]

Nice looking rims

But as previous post mentioned, needs to be a bit lower

[westb]

Originally Posted by bake

You will need coilovers and be willing to dial them way down in order to be able to pull of 22" wheels on an F10. Wheel design isn't bad though.

Thanks! I sent you a pm about coilovers

[westb]

Originally Posted by MELLOWYELLOW06

Nice looking rims

But as previous post mentioned, needs to be a bit lower

Going lower scares me.....rubbing!

[MELLOWYELLOW06]

It shouldn't

What are your offsets and tire sizes?

[MELLOWYELLOW06]

30 up front is safe
And 38-40 out back should be safe as well

[westb]

Originally Posted by MELLOWYELLOW06

30 up front is safe
And 38-40 out back should be safe as well

Front 34 offset - 245/30/22
Rear 38 offset - 295/25/22

[westb]

Originally Posted by westb

Front 34 offset - 245/30/22
Rear 38 offset - 295/25/22

Rubbed once at high speed on a big dip. My biggest issue is that my wife was in the car. So now my car is off limits to the kids..lol

[MELLOWYELLOW06]

I'm assuming out back?

40 may be safer on 22

[westb]

Originally Posted by MELLOWYELLOW06

I'm assuming out back?

40 may be safer on 22

Yes rubbed on the right rear

[bake]

We need to know more than just the offset, what is the width of your rear rims?

[westb]

Originally Posted by bake

We need to know more than just the offset, what is the width of your rear rims?

22x10.5

[LACSTER]

Originally Posted by westb

Thanks! I sent you a pm about coilovers

Unfortunately there is no coilovers available for the xdrive at this time.

I'd recommend some H&R springs for now. Please lower it asap!

[westb]

Originally Posted by LACSTER

Unfortunately there is no coilovers available for the xdrive at this time.

I'd recommend some H&R springs for now. Please lower it asap!

My rears are slightly beyond flush so I have to do something about that before I would be comfortable with a drop. They occasionally rub now

[Dan1416]

Originally Posted by westb

My rears are slightly beyond flush so I have to do something about that before I would be comfortable with a drop. They occasionally rub now

They should camber in slightly once you lower. If it's not enough you could always have a little bit of negative camber added. Or you can have up to 3mm safely shaved off the hub. But I think you'll be fine after lowering

[westb]

New lip and painted reflectors

[weezie]

What kind of front lip is that?

[lsturbointeg]

Just my opinion but I think the wheels are too big? If they are rubbing on dips at that height what happens when you lower it?

[westb]

Originally Posted by weezie

What kind of front lip is that?

Kellener Sport http://www.bavauto.com/shop.asp