[1sickf10]

Hi everyone. I have a 2011 535i. I bought an m5 steering wheel with paddle shifters and also bought the sport/comfort buttons that go by the shifter. My car had non of these options when I got it. I wired the sport/comfort buttons already using a diy I found. My question is can these options by coded with BimmerCode? If so, how?

[ezaircon4jc]

I think you need ESys to change the VO code.

[Leozao]

You have to enable SAT (Sport Automatic Transmission) in the Transmission tab to the paddle shifters work. However to add the sport/eco buttons its not easy to do it in Bimmercode because of all the parameters that need to be changed (most of the parameters have not yet been discovered) so its better to do it with Esys.

[1sickf10]

Ok. I’m going to try and find a local Indy shop to see if they can do it.