|
|
|
2010 2011 BMW 5 Series Forum F10 *Sold* FS: F10 OEM M5 Diffuser |
|
Post Reply |
|
Thread Tools | Search this Thread |
05-30-2016, 12:45 AM | #1 |
Captain
245
Rep 785
Posts |
*Sold* FS: F10 OEM M5 Diffuser
Selling a F10 OEM M5 diffuser $150 takes it I'm in the San Diego area but I can meet in the SD, LA, OC area The diffuser is currently plastidipped in black Last edited by SLVSRFR; 02-21-2017 at 10:22 PM.. |
06-17-2016, 09:50 PM | #4 |
New Member
2
Rep 23
Posts |
any photos you can send me/post? do i need any type of insert? i have a m-package, do you know if it'll fit? ill be in san diego sunday and can pickup, need a diffuser so i can install my eisenmann quad exhaust since my 528i only has 1 side.
|
Appreciate
0
|
06-18-2016, 01:36 AM | #5 |
New Member
2
Rep 23
Posts |
thanks for reply blackwidow. but looks like cutting will be needed to make it fit IF i don't replace the bracket in the back with a m5 one. their not too expensive at 40'ish. but after i factor in paint, probably cost as much as a rep carbon fiber diffuser on ebay. ill call my paint supplier tomorrow as well as my hookup at the dealer see if i can score some cheap prices keep the price low and possibly still get it.
|
Appreciate
0
|
06-21-2016, 11:08 PM | #9 | |
Captain
245
Rep 785
Posts |
Quote:
All you would need to do is remove the dip, scuff the primer with sand paper, and the prep is done for paint. Would be real easy to DIY. I was going to shoot it jet black and clear it myself (Around $35 if you DIY). But I preferred the matte black and dip gets the job done for that. If you prefer a shop to do it, the shop would just need to spray and clear. Shouldn't be more than $100-$150 on the high side since most shops have black paint laying around because its a common color. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|