|
|
09-15-2012, 02:03 PM | #1 |
G-MAN
44
Rep 241
Posts |
tuner lug bolts for F10
i just received my Rohana RC10s but with different lug bolts (M12x1.5). can anybody confirm that our cars use M14x1.25? i don't see much of choices for spline lug bolts, trying to avoid ebay. wanted to find OEM quality black tuner lug bolts but no luck here. thanks in advance.
|
09-15-2012, 03:02 PM | #2 |
Brigadier General
256
Rep 4,721
Posts |
M14 * 1.25 is the factory spec.
Your oem lock bolt may not fit your aftermarket wheel, if that is the case, you will need something like a Rad lock. |
Appreciate
0
|
09-15-2012, 05:44 PM | #3 | |
Lieutenant
44
Rep 400
Posts |
Quote:
Just got done adding some wheel spacers to the front and rear of it. As a result, I had to purchase longer wheel bolts to accomodate. ECS has multi bolt lengths in black zinc just like the stock bolts. Make sure you choose the correct seat (conical seat or ball seat). http://www.ecstuning.com/BMW-F10-535...s/Wheel_Bolts/ Last edited by Andy H.; 09-15-2012 at 05:51 PM.. |
|
Appreciate
0
|
09-17-2012, 08:25 PM | #4 |
Private
27
Rep 85
Posts |
See if your stock lugs clear. I'm running forgestars that have narrow lug clearance but was able to use the stock bolts but had to use thin walled sockets.
Wheel locks might be a challenge for the narrow holes, so if you wanted to use a single tuner as a lock to slow down thieves, you can try these - http://www.ezaccessory.com/Black_Tun.../98-0180bk.htm |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|