[LACSTER]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

SOLD.....

[PaulBailey@ltbmw]

Whaa?
Why? What's next!?

[HouseofPang]

[78mao]

bump for kev

[KRUZNM3]

sick wheels should go fast

[LACSTER]

Thanks guys all pm's replied

[540.M5.550]

Couple of Questions for you.

Do you know if this will fit a F10 550i M-sport?
What size tires did you have mounted on these wheels?
Are you running any spacers?

Thanks

[LACSTER]

Originally Posted by 540.M5.550

Couple of Questions for you.

Do you know if this will fit a F10 550i M-sport?
What size tires did you have mounted on these wheels?
Are you running any spacers?

Thanks

These will fit your car perfectly. It was custom made and measured so no spacers required. I was running 285/30/20 rear and 245/35/20 fronts.

You're in Orange County so feel free to come check them out.

Kevin

[LACSTER]

bump

[LACSTER]

bump

[jblumel]

Are these still available? I'd PM you, but I'm still limited by the minimum post rule.

[LACSTER]

Originally Posted by jblumel

Are these still available? I'd PM you, but I'm still limited by the minimum post rule.

Yes what's your email address? Or you can post some more on the forum
and that will allow you to pm. I think you need 10 posting before pm.

[jblumel]

Ya, it's 5 posts and then I have to wait 24 hours. I'm not sure I want to post my email publicly.

[jblumel]

Just to clarify, these are without tires, correct?

PS, I'm splitting up these questions to get to the post limit

[jblumel]

You mentioned these were custom and are flush with the body, did you have any chipping happen on the side as a result of the tire poking out a bit farther than stock?

(5 posts! -- I'll PM you in 24 hours ... )

[LACSTER]

Originally Posted by jblumel

You mentioned these were custom and are flush with the body, did you have any chipping happen on the side as a result of the tire poking out a bit farther than stock?

(5 posts! -- I'll PM you in 24 hours ... )

Yes it's the wheels only and they are custom made and flush with the fender but don't touch the fender at all. The wheels are flawless

[jblumel]

Sorry, couple more questions -- how much do they weigh? and do you have an estimate on shipping to Madison, WI?

It just occurred to me that the offets and staggered nature of these might not work on my 535i with xDrive. Are these strictly setup for a rear wheel drive version?

[LACSTER]

Originally Posted by jblumel

Sorry, couple more questions -- how much do they weigh? and do you have an estimate on shipping to Madison, WI?

It just occurred to me that the offets and staggered nature of these might not work on my 535i with xDrive. Are these strictly setup for a rear wheel drive version?

I don't know the weight and shipping I think well run about $250. It doesn't matter between xdrive or not they still fit and work the same. Your OEM wheels on your car now should be staggered as well.

[jblumel]

Originally Posted by LACSTER

I don't know the weight and shipping I think well run about $250. It doesn't matter between xdrive or not they still fit and work the same. Your OEM wheels on your car now should be staggered as well.

My car is still in production so I can't exactly check. Looking at the order, bmw's site, several tire sites, and searching on this forum, I've determined that the wheels and tires I'll be getting when my car arrives are:

Wheel: Style 331 19x8 all around
Tire: 245/40/R19 all around

Please forgive my hesitation, but I'm just trying to make sure I don't pay for these wheels and have them shipped only to be stuck with a set of sweet, sweet wheels that I can't put on my car.

I'm going to take these wheel and tires sizes into my dealer tomorrow and get a thumbs up from them before committing to buying them.

I don't know how much truth there is to this -- but I was always told that wheels for RWD weren't always compatible with AWD vehicles in the same way that FWD wheels wouldn't work on a RWD vehicle. Something about offset and axle lengths or something -- I really have no idea, it's just what I've been told in the past. It's also entirely possible that I've mixed it up and I'm completely wrong.

In any case, I'll get to the bottom of this and get you a final decision shortly.

Thanks for your patience!

[LACSTER]

Originally Posted by jblumel

My car is still in production so I can't exactly check. Looking at the order, bmw's site, several tire sites, and searching on this forum, I've determined that the wheels and tires I'll be getting when my car arrives are:

Wheel: Style 331 19x8 all around
Tire: 245/40/R19 all around

Please forgive my hesitation, but I'm just trying to make sure I don't pay for these wheels and have them shipped only to be stuck with a set of sweet, sweet wheels that I can't put on my car.

I'm going to take these wheel and tires sizes into my dealer tomorrow and get a thumbs up from them before committing to buying them.

I don't know how much truth there is to this -- but I was always told that wheels for RWD weren't always compatible with AWD vehicles in the same way that FWD wheels wouldn't work on a RWD vehicle. Something about offset and axle lengths or something -- I really have no idea, it's just what I've been told in the past. It's also entirely possible that I've mixed it up and I'm completely wrong.

In any case, I'll get to the bottom of this and get you a final decision shortly.

Thanks for your patience!

No worries feel free to ask as many question you may have. This is not
a small purchase so I understand your concerns. BTW I have all the orginal
boxing from Nutek so shipping will be a breeze.

[LACSTER]

jblumel,

Hope this link helps.

http://f10.5post.com/forums/showthread.php?t=472458

[LACSTER]

Sold to jblumel.......