[shinsengjun]

http://varrstoen.com/blog/?s=bmw

will any of these fit my 2012 528i msport car? PLZ help i wanna pick up these wheels RIGHT NOW

VarrsToen® ES 2.2.2 (19″)
Front: 19×9.5 +20
Rear: 19×10.5 +22
Finish: Custom “Takata” Green
Vehicle: BMW E60

or

VarrsToen® ES3 (19″)
Front: 19×9.5 +22
Rear: 19×10.5 +22
Finish: Candy Red (Powder Coat)
Vehicle: BMW E92


or

VarrsToen® ES 2.2.2 (19″)
Front: 19×9.5 +20
Rear: 19×10.5 +22
Finish: Matte Black
Vehicle: BMW E92 M3


if they do not fit what do i need to do

ex, buy spacers? roll the fenders?

what does +## mean?

[enzeru]

They will stick out about an inch past your fender so these wheels will not fit. +## means offset,

And offset is the distance of your wheel centerline and its mounting pad, measured in mm. "0" is being right in the middle.

[shinsengjun]

Originally Posted by enzeru

They will stick out about an inch past your fender so these wheels will not fit. +## means offset,

And offset is the distance of your wheel centerline and its mounting pad, measured in mm. "0" is being right in the middle.

ooo

but
how can they fit the models above like

e60 and e92

doesnt f10 have a bigger chasis

[snj1013]

Nope, they can't be modified. They will look ghetto. Look elsewhere.

[enzeru]

Originally Posted by shinsengjun

ooo

but
how can they fit the models above like

e60 and e92

doesnt f10 have a bigger chasis

Bigger chassis got nothing to do with offset.. and those models have lower offset than F10

[Alan l.]

Replica volks on a F10? its like e90post all over again....

Either way like people already said the rears won't fit unless you want to make it ghetto stretched look.

[shinsengjun]

Originally Posted by Alan l.

Replica volks on a F10? its like e90post all over again....

Either way like people already said the rears won't fit unless you want to make it ghetto stretched look.

sighh my budget is like 1500 dollars..

what other wheels would you recommand. should i just go with vmr? or advant garde

wheels and tires =1500 \\

oh yeah what if i get a different off set? for those wheels

what off set would i need for front and rear

[bobblehead]

$1500 wheels & tires ... it's going to be very tough !

Did you try Tirerack. They have some clearance wheels for your model.


http://www.tirerack.com/wheels/resul...&filterNew=All


As you have mentioned, VMR & AG wheels should be around $1000 for the set of 4. But they are gravity cast.

[Alan l.]

I think Avant Garde are low pressure cast which is better than just gravity cast. I prefer the M368 for the F10 body. Sporty but still classy.

$1500 for wheels and tires in 20" setup is going to be really tuff.

Alan

[shinsengjun]

Originally Posted by bobblehead

$1500 wheels & tires ... it's going to be very tough !

Did you try Tirerack. They have some clearance wheels for your model.


http://www.tirerack.com/wheels/resul...&filterNew=All


As you have mentioned, VMR & AG wheels should be around $1000 for the set of 4. But they are gravity cast.

what is gravity cast?

[Alan l.]

gravity cast< low pressure cast< form flowed < Forged

This is how wheels are made in the order from weakest (gravity cast) to strongest (forged)

Simply put cheap gravity cast wheels will bend/crack more easily than a forged wheel.

I've had cheap replica wheels before and they bend like swiss cheese. Might seem like you are saving money in the beginning but in the long run you'll end up spending more money since you have to keep fixing or replacing those cheap wheels.

Alan

[bobblehead]

+1 One big pothole hit and you are toast !

Besides, the paint finish on these gravity cast wheels are pretty bad.

Chinese Made gravity cast wheels = Headaches (lack of quality control during production process). Do note the VMR wheels are made in Taiwan and the quality is hit & miss.

[Jmo550]

Go 19s and lower it . That's my plan

[shinsengjun]

how are miro wheels? this person messaged me

[shinsengjun]

what kind of 19's

[bobblehead]

http://www.e90post.com/forums/showthread.php?t=490438

Originally Posted by shinsengjun

how are miro wheels? this person messaged me

[bobblehead]

OP, will you consider going 18"

There is a group buy on Apex wheels. Flow formed cast wheels. But still around $1100 for set of 4 - wheels only

http://www.e90post.com/forums/showthread.php?t=684707
http://www.apexraceparts.com/EC-7-Pr...Buy_p_154.html