|
|
06-06-2013, 01:20 PM | #1 |
Enlisted Member
0
Rep 37
Posts |
Q1 Forged Operation F10
What's up my fellow F10 Members,
I am currently coming out with my own wheel line soon called Q1 Forged. It will be a private label that only focuses on custom forged wheels. I took the Donz Scarface because of the 3D Face, the Asanti CX 506 because of the curved spokes, the Rennen bowl where the lug nuts go. The lip will be stepped and hooked at the same time. The face will be projecting to the edge of the lip as much as possible with the lowest offsets possible for maximum concavity without rubbing or any fender modifications. I had my artist create a sketch of the merged wheels and I'm bringing a one of a kind wheel in the world to life!!! I said to myself since my brother is one of the largest forged wheel makers in the US I might as well start having my own wheels made so I starting to create Q1 Forged. This set will be going on my 12 535xi, and I will be lowering the car on Hartge springs. I will keep posting updates of the wheel production. This wheel is being cut in 21'$ attached is the sketch and cad image. I can have any wheel made!!!! Last edited by Cewone(Q1); 06-07-2013 at 05:58 PM.. Reason: Typos |
Post Reply |
Bookmarks |
|
|