|
|
|
2010 2011 BMW 5 Series Forum F10 Alignment and rear camber |
|
Post Reply |
|
Thread Tools | Search this Thread |
05-25-2016, 07:54 PM | #1 |
New Member
0
Rep 14
Posts |
Alignment and rear camber
I just got my Michelin PSS's mounted (550i M Sport) today along with an alignment and added some rear spacers. The technician was asking if I wanted a more aggressive camber in the rear. I told him I like to drive spirited so we decided to add a smidge more......after it was off the rack he told me he set it at -2.2 vs. the -1.8 spec. Is this a little excessive? I probably should have just had him set it to spec....should I go back and have it redone or is .4 degrees not much of a difference?
Thanks!!! |
05-25-2016, 09:40 PM | #2 |
Lieutenant General
9159
Rep 14,521
Posts |
Here's mine I just had done about a month ago and as you can see my rear camber specs -2.4 & -2.6. According to the tech that's pretty flat considerating I'm on 21's. So far after a month it's been good. No inner tire wear that I could see but it's probably too soon. I've taken the car through some pretty aggressive turns and it sticks!
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg Last edited by lsturbointeg; 05-25-2016 at 09:46 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|