F10 n63 Intake Interest

badblack550xi · 11-05-2015, 10:15 AM

Quote:

Originally Posted by Teddylongtooth

Badblack, have you always had a '13 I thought you had an '11 550xi.

always had a 13

badblack550xi · 11-05-2015, 10:18 AM

Quote:

Originally Posted by belal242

Sounds good, do you have an idea of what they may go for?

$1000 not a penny more not a penny less.

UA_civ_eng · 11-05-2015, 01:38 PM

Quote:

Originally Posted by badblack550xi

it would be if i dynoed more than i hit the track which is not the case. i also use a Mustang Dyno and not a Dyno jet.

Well okay then! Glad we clarified!

Bossman535 · 11-05-2015, 05:23 PM

Quote:

Originally Posted by badblack550xi

Quote:

Originally Posted by belal242

Sounds good, do you have an idea of what they may go for?

$1000 not a penny more not a penny less.

Nice... I was in the market for some downpipes but these are tempting. More videos please !!

Teddylongtooth · 11-05-2015, 05:36 PM

Quote:

Originally Posted by badblack550xi

$1000 not a penny more not a penny less.

Damn your car sounds good!

badblack550xi · 11-05-2015, 08:23 PM

Quote:

Originally Posted by Bossman535

Nice... I was in the market for some downpipes but these are tempting. More videos please !!

badblack550xi · 11-05-2015, 09:28 PM

SLVSRFR · 11-08-2015, 08:52 PM

What setup is that in your video besides the intake? Downpipes? Exhaust?

badblack550xi · 11-08-2015, 11:34 PM

Quote:

Originally Posted by BCK2BLN

What setup is that in your video besides the intake? Downpipes? Exhaust?

BMS stage 2

Bossman535 · 11-09-2015, 03:30 PM

Quote:

Originally Posted by BCK2BLN

What setup is that in your video besides the intake? Downpipes? Exhaust?

I believe he has m5 mufflers and 3" piping back to AR catted downpipes.

DrewBert · 12-02-2015, 08:44 PM

any updates?

Zer0Cool92 · 12-04-2015, 04:43 PM

Quote:

Originally Posted by badblack550xi

Hey Guys i wanted to see how many people are interested in the intake and if its worth it for me to go past the prototype stage. I am trying to keep the cost as low as possible but with out much interested i wont bother to find solutions to cut cost.

Please post your name if you're interested, in this format:

badblack550xi: interested

I don't see the intake on the website anymore.

badblack550xi · 12-04-2015, 07:09 PM

Quote:

Originally Posted by Zer0Cool92

I don't see the intake on the website anymore.

took it down for now =D

Zer0Cool92 · 12-05-2015, 06:10 PM

Quote:

Originally Posted by badblack550xi

Quote:

Originally Posted by Zer0Cool92

I don't see the intake on the website anymore.

took it down for now =D

When do you think it'll be back up ? Any reason for the take down ?

badblack550xi · 12-06-2015, 10:51 AM

Quote:

Originally Posted by Zer0Cool92

When do you think it'll be back up ? Any reason for the take down ?

hard to get them made, shops need big orders small orders take for ever, don't like people waiting. so i am searching for a shop that can work with me on per order basis.

Husni08 · 12-23-2015, 01:29 PM

Just read through all eight pages after reading the ambitious efforts previously. Hats off to you bro, this is really sick! I just picked up my 13' 550i and was looking at possible mods. I would be extremely interested in obtaining one of your intakes. If you could PM me info on when they'll be available for sale again I'd appreciate it.

Congrats on the success!

badblack550xi · 01-26-2016, 08:16 PM

Boys and girls before i rerite my 550 i decided to make stage 3 of my intake development, and i am so pleased how well it came out that i shredded a tear.

Key features:
Fits under the side sway bars.
You can put your engine cover in OEM position.
Easy to install (30 minutes no need to remove anything but the air boxes and grilles).
Lower Cost.

Here is a video clip and pictures more coming soon.

Zer0Cool92 · 01-26-2016, 08:27 PM

Quote:

Originally Posted by badblack550xi

Boys and girls before i rerite my 550 i decided to make stage 3 of my intake development, and i am so pleased how well it came out that i shredded a tear.

Key features:
Fits under the side sway bars.
You can put your engine cover in OEM position.
Easy to install (30 minutes no need to remove anything but the air boxes and grilles).
Lower Cost.

Here is a video clip and pictures are coming soon.

Sick man.. What's the price and when will you put it on the site for order? Put me down for a set !

MattPro · 01-26-2016, 08:50 PM

+1, definitely interested in a set

badblack550xi · 01-26-2016, 09:20 PM

Quote:

Originally Posted by Zer0Cool92

Sick man.. What's the price and when will you put it on the site for order? Put me down for a set !

check original post 1st picture, im also making Carbon Fiber version for myself.

price is $1,030.18 for 1st 10 sets shping after that $1200 firm + shipping which is about $50

550Reasons · 01-27-2016, 09:24 AM

I may just have to bite the bullet on this, hopefully I have the funds avaliable when its released.

DesiRacing-AjayB · 01-27-2016, 11:50 AM

sick! i think i am going to have to get these.

Can you post of a picture of how they look with the finished installation with the engine cover?

11-05-2015, 09:28 PM	#161
badblack550xi Colonel 465 Rep 2,416 Posts Drives: F10 550i 2011 F90 2020 COMP Join Date: May 2013 Location: NJ iTrader: (0)	Last edited by badblack550xi; 11-07-2015 at 01:32 AM..
	Appreciate 0 Quote

11-08-2015, 08:52 PM	#162
SLVSRFR Captain 245 Rep 785 Posts Drives: BMW 550i Join Date: May 2015 Location: SoCal iTrader: (0)	What setup is that in your video besides the intake? Downpipes? Exhaust?
	Appreciate 0 Quote

12-02-2015, 08:44 PM	#165
DrewBert Lieutenant 152 Rep 567 Posts Drives: 2020 BMW M8 Gran Coupe Comp Join Date: Jan 2007 Location: Regina,Sk, Canada iTrader: (1)	any updates?
	Appreciate 0 Quote

12-23-2015, 01:29 PM	#170
Husni08 New Member 12 Rep 29 Posts Drives: 2013 550i M Sport Join Date: Apr 2010 Location: Dallas, Texas iTrader: (0)	Just read through all eight pages after reading the ambitious efforts previously. Hats off to you bro, this is really sick! I just picked up my 13' 550i and was looking at possible mods. I would be extremely interested in obtaining one of your intakes. If you could PM me info on when they'll be available for sale again I'd appreciate it. Congrats on the success!
	Appreciate 0 Quote

01-26-2016, 08:16 PM	#171
badblack550xi Colonel 465 Rep 2,416 Posts Drives: F10 550i 2011 F90 2020 COMP Join Date: May 2013 Location: NJ iTrader: (0)	Boys and girls before i rerite my 550 i decided to make stage 3 of my intake development, and i am so pleased how well it came out that i shredded a tear. Key features: Fits under the side sway bars. You can put your engine cover in OEM position. Easy to install (30 minutes no need to remove anything but the air boxes and grilles). Lower Cost. Here is a video clip and pictures more coming soon. __________________ 2011 550i RWD 60-130 7.35 Last edited by badblack550xi; 01-26-2016 at 09:19 PM..
	Appreciate 0 Quote

01-26-2016, 08:50 PM	#173
MattPro Private First Class 65 Rep 163 Posts Drives: '13 F10 550iX, '91 E30 Join Date: Dec 2015 Location: Chicago Burbs iTrader: (0)	+1, definitely interested in a set __________________ Thanks, Matt 2013 F10 550iX Carbon Black/MSport BMW Fault Code DB Last edited by MattPro; 01-26-2016 at 09:04 PM..
	Appreciate 0 Quote

01-27-2016, 09:24 AM	#175
550Reasons Captain 150 Rep 738 Posts Drives: F10 550i Join Date: Aug 2014 Location: South Florida iTrader: (1)	I may just have to bite the bullet on this, hopefully I have the funds avaliable when its released. __________________ 2011 550i 2013 M5 2014 M5 CP 2016 550i
	Appreciate 0 Quote

01-27-2016, 11:50 AM	#176
DesiRacing-AjayB Private First Class 22 Rep 144 Posts Drives: BMW 550i xdrive f10 Join Date: Jul 2014 Location: Ottawa iTrader: (1)	sick! i think i am going to have to get these. Can you post of a picture of how they look with the finished installation with the engine cover?
	Appreciate 0 Quote