|
|
|
2010 2011 BMW 5 Series Forum F10 BMW rear camera blue screen |
|
Post Reply |
|
Thread Tools | Search this Thread |
09-30-2015, 12:32 AM | #1 |
New Member
1
Rep 7
Posts |
BMW rear camera blue screen
Hello,
i retrofited yesterday a TRSVC modul, camera wire from kufatec and the camera. i coded it with esys: FA edited and added 3AG then i coded it to HU_CIC,PDC. The TRSVC had no CAFD, i added the newest cafd from the highest ilevel and coded the FA to TRSVC. (i doent selected the cafd which is on the ilevel from my car) After that i pushed the PDC button and geht following screen: https://www.dropbox.com/s/ytvuufall5...%2008.jpg?dl=0 A blue screen with an error "Camera Malfunction Warning" I wanted to calibrate the camera with Rheingold ISTA, but i get there the warning that the calibration process cant start because the camera is not available. Can you help? What did i wrong ? I want to code today the FA on the Root of all ecus and check the wire from the camera and maybe the 12V wire, but i think, when the TRSVC modul has get recognized by esys the 12V wire must be okay. sry for my english, i hope you can help Last edited by gomble; 09-30-2015 at 02:18 AM.. |
Post Reply |
Bookmarks |
|
|