[ojp5q]

Hey all,

I am writing this post because the idea of an axle back/cat back exhaust systems for my 2011 535xi has consumed my life for the past few weeks. I don't want anything too crazy sounding (yet) so I think axle back is the way to go (for now). I have narrowed it down to 3 options:

1. Eisenmann Race (may be too expensive for just axle back)
2. Remus sport (they do not make a race version for f10. Fear it may be too quiet/the tips are pretty damn ugly)
3. Custom exhaust from Benchmade Proper (only axle back with Vibrant mufflers and custom piping. Is Vibrant good?)

Pretty much any input/videos/pictures that are not on the internet already (seen them all) would be extremely helpful. Or any other options that I haven't thought of would be nice too.

MAX $2500 for the system

Thanks guys.

[BmoreF10]

You could get a turbo-back system for less than your max price at Benchmade Proper. I'm getting mine installed next week.

[yxc145]

I, also think REMUS tips are ugly. The big logo, the carbon fiber strip, and the double tube and flat end (instead of slanted). Looks like something you would put on low end American cars.

Don't know how much the bench proper custom system cost. But my magnaflow custom system was a really good deal. Catback or Axlback won't make a difference. The resonator on our cars doesn't eliminate the sound much. It is mainly the 2 mufflers in the back. I knew because I originally took out resonator and replaced with straight pipes. No difference. If I were you, just do Axle back system.

[yxc145]

If you want something already pre-fabricated. MEGAN racing has a system for about $900. It is still more than the custom system, but already a pretty good price.
One good thing is that there are 3 different tip selections you can pick. I think there is a thread about this.

[bb2405]

Originally Posted by yxc145

If you want something already pre-fabricated. MEGAN racing has a system for about $900. It is still more than the custom system, but already a pretty good price.
One good thing is that there are 3 different tip selections you can pick. I think there is a thread about this.

They are new to German cars so I wouldn't really trust it. Stick with Eisenmann Remus or Meistershaft

[yxc145]

Originally Posted by bb2405

They are new to German cars so I wouldn't really trust it. Stick with Eisenmann Remus or Meistershaft

I am curious what the performance gain is for all those brand name catback or axle back exhaust system.

[ojp5q]

I would definitely do a turbo back, but don't want to remove the cat (does this remove the cat and become illegal in VA?). What about the Vibrant axle back from Benchmade? Anyone know anything about Vibrant?

[sanf]

sounds like you have narrowed yourself down to just 1 and 3. Is the $2500 installation included? if so, #1 is going to be tight. So that leaves you with #3.

[yxc145]

Originally Posted by ojp5q

I would definitely do a turbo back, but don't want to remove the cat (does this remove the cat and become illegal in VA?). What about the Vibrant axle back from Benchmade? Anyone know anything about Vibrant?

I think it is illegal and will make the CEL go on.

[luigimaster24]

You can get the Meisterschaft GTS axle back through a dealer for right about your price range.

You will be SO glad you did.

[bb2405]

Originally Posted by luigimaster24

You can get the Meisterschaft GTS axle back through a dealer for right about your price range.

You will be SO glad you did.

where????

[LACSTER]

All exhaust systems name brand or not will offer you only a few more hp's.

I think you should look into BMP and do the Vibrant axle back system.
It should run you more then a $1000 installed going axle back.
They use the Ultra Quiet Resonator as the exhaust I think which
gives you a tight sounding tone if that's what you're looking for.

[ojp5q]

Originally Posted by luigimaster24

You can get the Meisterschaft GTS axle back through a dealer for right about your price range.

You will be SO glad you did.

I actually called a few dealers and they told me they do full cat back ONLY. If you know a dealer that would do this, it would be my first choice hands down. Otherwise, I might go with the BMP with Vibrant muffler and ask for some really nice slanted exhaust tips. Probably a 3 1/2 inch diameter. I just wish I could hear the Vibrant muffler on a 535 F10 though. I'm worried it would sound too "ricey" if you know what I mean.

Thanks for all the feedback (more please).

[BmoreF10]

Originally Posted by ojp5q

I would definitely do a turbo back, but don't want to remove the cat (does this remove the cat and become illegal in VA?). What about the Vibrant axle back from Benchmade? Anyone know anything about Vibrant?

I'm going turbo-back but having BMP install a high flow cat. I didn't want to delete the cat because my vehicle is registered in VA also.

[ojp5q]

Originally Posted by BmoreF10

I'm going turbo-back but having BMP install a high flow cat. I didn't want to delete the cat because my vehicle is registered in VA also.

That sounds pretty solid. If you are getting it done this weekend, do you mind letting me know how it goes (maybe pics and videos)? I'm really curious about that sort of setup. Thanks.

[BmoreF10]

It'll be done on the 16th. I'll let you know how it goes.