|
|
|
2010 2011 BMW 5 Series Forum F10 Finally, my Baby is delivered... |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-05-2011, 04:25 AM | #23 |
Lieutenant
6
Rep 473
Posts |
As Xenon says, if you have xenons (no pun intended) then you will have washers in the EU as it's a legal requirement. If you have halogens, you can buy the washers or not, the blanks will be fitted if the latter as the bumper is a single part #.
__________________
|
Appreciate
0
|
06-05-2011, 07:19 AM | #24 | |
First Lieutenant
67
Rep 322
Posts |
Quote:
I'm going to clay it, put a coat of Klasse All-in-One, then Collinite 845 insulator wax, then top it off with Natty's Blue Wax. Klasse AIO is well respected as a base-prep. Collinite is a very tough sealant wax, and the Natty's Blue is apparently excellent on dark cars, bringing out a lot of depth. When I'm done I'll put up more picks. We've recently moved to the UK, so my weekends are taken up with a lot of home chores at the moment. I do get to clean her weekly, but I need to really treat her with a good top coat!! Last edited by Z4C_luvver; 06-05-2011 at 09:18 AM.. |
|
Appreciate
0
|
06-07-2011, 01:45 AM | #25 |
First Lieutenant
44
Rep 327
Posts |
Advice please?
I'd like to put some treatments like that on my car. From new - six weeks ago - I applied a coat of AutoGlym resin polish. So far that's all that's all that's on it. Do I put the Collinite on then the NAtty's? My paintwork is still immaculate so would I need to clay it down? Thanks. |
Appreciate
0
|
06-17-2011, 07:08 AM | #26 | |
First Lieutenant
67
Rep 322
Posts |
Quote:
Go to your car and feel your paintwork using a shopping bag as a glove. You'll be shocked. After claying, it'll be a smooth as a baby's bot-bot. So yes, if you'd like to go the 'whole hog', clay away. You'll be happy. Waxing the car after is a whole lot easier and less of a chore. Regards the order of Natty's and Collinite, yes Natty's goes on after Collinite. Reading the forums here and all the rave reviews, I actually succumbed and bought Jeffs Werkstatt acrylic Jett, which I will use instead of the Collinite. I hope this helps somewhat. Last edited by Z4C_luvver; 06-17-2011 at 07:41 AM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|