|
|
|
2010 2011 BMW 5 Series Forum F10 Mission Performance : N63tu Stage 2 tune paired with downpipes |
|
|
Thread Tools | Search this Thread |
02-26-2016, 11:13 PM | #1 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
Mission Performance : N63tu Stage 2 tune paired with downpipes
We have recently finished production of the first downpipe set for N63tu and had a chance to run the car on a dyno. Paired with our stage 2 reflash, we were able to achieve impressive results. Peak gains of 105hp and 112ft-lb with 180ft-lb gains at 2500rpm.
The final production stage 2 tune is dialed down too 100ft-lb/100hp gains with smoother torque curve. Since we hit the MAP sensor limits with our stage 2 reflash, we will be releasing stage Stage2+ hardware/calibration package that will offer 3.5bar MAP sensors as well as further power gains. Last edited by MissionPerformance; 02-26-2016 at 11:29 PM.. |
|
02-26-2016, 11:20 PM | #2 | |
Colonel
465
Rep 2,416
Posts |
Quote:
__________________
2011 550i RWD 60-130 7.35
Last edited by badblack550xi; 02-27-2016 at 12:07 AM.. |
|
Appreciate
1
1stock5501.50 |
02-26-2016, 11:30 PM | #3 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
Fixed the youtube link.
Yes, the car will visit 1/4 mile at some point just to get the numbers but this is not a car for a drag strip. Tho it is pretty fast for sure. |
Appreciate
0
|
02-27-2016, 12:34 PM | #8 |
Lieutenant General
9159
Rep 14,522
Posts |
Ah I miss the ole' Willow Springs track I will say if lowered on coilovers with some dampening adjustments and some sway bars any of the 5 series could be a fun track car
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
0
|
02-27-2016, 08:50 PM | #9 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
Yes for sure swaybars and coilovers are a must on a 550+HP boat. But in reality, F10 belongs on wide open roads and not a track.
|
Appreciate
1
|
02-27-2016, 09:30 PM | #11 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
Are you referring to stage 2 with original MAP sensors or Stage2+ with higher rated MAP sensors?
|
Appreciate
0
|
02-27-2016, 09:31 PM | #12 |
Captain
420
Rep 862
Posts |
I'll settle for info on both please, thanks.
__________________
Retired 2016 BMW 550i xDrive MSport | 2013 BMW 550i xDrive MSport | 2012 BMW 535i xDrive | 1988 BMW 325ic | 1984 BMW 318i
|
Appreciate
0
|
02-27-2016, 09:58 PM | #13 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
Stage 2 is already finished and ready for production. I will have dyno results for it in next few days. Stage2+ equipped with MAP sensors will be available in the next month or so. The software and hardware is finished, just need to get a dyno day setup for few cars.
|
Appreciate
1
|
02-27-2016, 10:59 PM | #14 |
Captain
420
Rep 862
Posts |
Great, I'll wait for the MAP sensors. Thanks.
__________________
Retired 2016 BMW 550i xDrive MSport | 2013 BMW 550i xDrive MSport | 2012 BMW 535i xDrive | 1988 BMW 325ic | 1984 BMW 318i
|
Appreciate
0
|
02-28-2016, 10:11 AM | #15 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
I will keep you guys updated. Everything is actually ready for public release and we already have 20 3.0bar custom MAP sensors in stock ready for shipment but we are still trying to finish our OBD and Boot read-out protection before we release the stage2+.
|
Appreciate
0
|
02-28-2016, 12:12 PM | #16 | |
Colonel
465
Rep 2,416
Posts |
Quote:
__________________
2011 550i RWD 60-130 7.35
|
|
Appreciate
0
|
02-28-2016, 02:09 PM | #17 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
Yes we have developed and perfected MAP sensor calibration with 3.5 and 3.0bar sensors. We have not publicly released it yet as we are looking for a way to protect both OBD and boot mode protection since theft is something we are highly concerned with. If we can not get protection implemented within next month or so, we will release the calibration without it and see who decides to copy it. Any local customer is welcome to contact us who is interested in this package.
|
Appreciate
1
1stock5501.50 |
02-28-2016, 03:49 PM | #19 |
1506
Rep 676
Posts
Drives: '17 F31 340xi US Spec
Join Date: Aug 2014
Location: The Woodlands, TX
|
We have answered that question for you on the other thread. We will be working on MSD85 support but as the continental computers have been discontinued by BMW, we can not promise you anything. If the development doesn't take up too much resources, we will for sure continue and offer the support for you guys, but I do not want to raise your hopes up.
|
Appreciate
0
|
02-28-2016, 04:32 PM | #20 | |
Colonel
465
Rep 2,416
Posts |
Quote:
__________________
2011 550i RWD 60-130 7.35
|
|
Appreciate
2
1stock5501.50 |
02-29-2016, 11:11 AM | #22 |
Captain
150
Rep 738
Posts |
WOW ! thats very impressive, if my next car isnt a M5 it'll be a 650 TU, and would love to get every bit of that
__________________
2011 550i
2013 M5 2014 M5 CP 2016 550i |
Appreciate
0
|
Bookmarks |
|
|