Front Lip Scrap Test

RC3 · 08-04-2011, 02:52 AM

Quote:

Originally Posted by AsiaKid

I wanted to get 3d designs, but my gf liked MSport more..so i decided to just let her choose. Plus since oem, better resale value. But, yes, the 10 day wait is very tempting.

You guys are having a meetup at Z hahaha.

Just do it like me. M sport + 3DDesign front lip.

AsiaKid · 08-04-2011, 03:07 AM

haha..maybe...i see how much yours scrape first..plus..such a long wait for WK.

Jacky328 · 08-04-2011, 06:30 AM

Quote:

Originally Posted by RC3

Jacky bro, that would save you 5k.

Oh, that's great to save 5K

Which means I can get more others

Jacky328 · 08-04-2011, 06:33 AM

Quote:

Originally Posted by RC3

.... do check with the scrapping though. the SE 3D lip seems like protruded a lit more than the M sport one.

Testing it by stick a box just like what you have done?

RC3 · 08-04-2011, 10:38 AM

Quote:

Originally Posted by AsiaKid

haha..maybe...i see how much yours scrape first..plus..such a long wait for WK.

If the lip scraped, what are all those stupid box tests for, Kid?

RC3 · 08-04-2011, 10:39 AM

Quote:

Originally Posted by Jacky328

Testing it by stick a box just like what you have done?

Yup, but better asked 3D the height of the SE lip. Jxnco only asked for the M sport lip.

IE92 · 08-06-2011, 11:13 PM

I was at the gas station today when I realized one of the splitters on my 3D design M-sport front lip was shattered. I have absolutely no idea how it happened either. Could have been a pothole or maybe some debris on the freeway.

If you are low on coilovers like I am you will definitely have issues with scraping. The 3D M-sport front lip is lower and sticks out further than the paper box you are using.

I think not having the splitters would make it much less likely to scrape though.

RC3 · 08-07-2011, 01:31 AM

Quote:

Originally Posted by IE92

I was at the gas station today when I realized one of the splitters on my 3D design M-sport front lip was shattered. I have absolutely no idea how it happened either. Could have been a pothole or maybe some debris on the freeway.

If you are low on coilovers like I am you will definitely have issues with scraping. The 3D M-sport front lip is lower and sticks out further than the paper box you are using.

I think not having the splitters would make it much less likely to scrape though.

Sorry to hear this Evan. I am surprised to know the splitter got shattered as it's made of carbon fiber. Are you getting a replacement?

Thanks for you insight. Since I am only on H&R springs and not that slammed, I hope it will be fine. I am only going for the lip and not the splitters.

From my test I used a 30mm high box and I got advice from 3DDesign that the lip is 15mm in height. So I guess pretty much I am safe. Lip will be arriving in a week on so. Let's see how it goes. Thanks again, Evan, for your advice.

mlai · 08-07-2011, 02:18 AM

Quote:

Originally Posted by RC3

Sorry to hear this Evan. I am surprised to know the splitter got shattered as it's made of carbon fiber. Are you getting a replacement?

Thanks for you insight. Since I am only on H&R springs and not that slammed, I hope it will be fine. I am only going for the lip and not the splitters.

From my test I used a 30mm high box and I got advice from 3DDesign that the lip is 15mm in height. So I guess pretty much I am safe. Lip will be arriving in a week on so. Let's see how it goes. Thanks again, Evan, for your advice.

RC3, maybe you should check with 3D Design on how much the lip protrudes out as well?

AsiaKid · 08-07-2011, 02:31 AM

yeyes, the protrusion is a factor to consider

random note. MLai, i saw you exiting Park Lane

mlai · 08-07-2011, 02:43 AM

Quote:

Originally Posted by AsiaKid

yeyes, the protrusion is a factor to consider

random note. MLai, i saw you exiting Park Lane

Really. Yes. Full load with family on a tiny car

RC3 · 08-07-2011, 04:35 AM

Too late to check as I already ordered. But should have plenty of buffer.

Let you guys know the real test later.

Jacky328 · 08-07-2011, 09:22 AM

RC bro, I think the most concern for the protrusion will be going up a slope.
Avoid go to those carpark with big slope will be fine!

RC3 · 08-07-2011, 10:10 AM

Quote:

Originally Posted by Jacky328

RC bro, I think the most concern for the protrusion will be going up a slope.
Avoid go to those carpark with big slope will be fine!

I already tried with the 30mm box at a very steep up slope and no scrap unless I drive very fast. So that's why I said the 15mm lip should be pretty safe. But after all is a mock up test, so I can't say 100% scrap free until I put the lip on.

grimlock · 08-07-2011, 01:16 PM

RC, from the pic it looks like your test placement was quite protruding, so factoring in your margin of safety the extra protrusion should not exceed your margin, you should be safe with your current drop etc.

EV0LVE · 08-07-2011, 11:12 PM

Like 78mao said, it's the sides that gets murdered even if you come in perpendicular to a driveway, I hope you dont. See the sides sticks down much further than the center. But it looks like you already bought it, so just be mindful and enjoy. There are also available clear bras that are a bit thicker, that might help.

Post pics whenyou get it.

RC3 · 08-07-2011, 11:31 PM

Quote:

Originally Posted by EV0LVE

Like 78mao said, it's the sides that gets murdered even if you come in perpendicular to a driveway, I hope you dont. See the sides sticks down much further than the center. But it looks like you already bought it, so just be mindful and enjoy. There are also available clear bras that are a bit thicker, that might help.

Post pics whenyou get it.

For the 3DDesign front lip, the sides will stick out even more with the splitters and that is why I didn't go for it. As per 78mao's advice, I have tested by sticking 30mm boxes at the two corners of the front bumper at an angle. I got no scraps even at the steepest ramp. So logically scraping won't be a issue with the 15mm high lip. But as said, nothing could be confirmed after I try it with the real lip.

Probably won't put on any clear bra. Actually I don't really care if the lip's bottom part scrap, as long as the front portion don't. Will keep you all posted.

ICIC · 08-09-2011, 09:22 AM

Quote:

Originally Posted by RC3

For the 3DDesign front lip, the sides will stick out even more with the splitters and that is why I didn't go for it. As per 78mao's advice, I have tested by sticking 30mm boxes at the two corners of the front bumper at an angle. I got no scraps even at the steepest ramp. So logically scraping won't be a issue with the 15mm high lip. But as said, nothing could be confirmed after I try it with the real lip.

Probably won't put on any clear bra. Actually I don't really care if the lip's bottom part scrap, as long as the front portion don't. Will keep you all posted.

Can't wait to see yours installed bro.

RC3 · 08-09-2011, 09:43 AM

Quote:

Originally Posted by ICIC

Can't wait to see yours installed bro.

the 3D lip is fast, only 7-10 days wait. will keep you guys posted.

tinybeammer · 08-09-2011, 11:34 AM

Rc3 congrats on your new mods....

RR80 · 08-10-2011, 09:51 PM

3d is the best looking in the front lip market!!

RC3 · 08-11-2011, 12:15 AM

Quote:

Originally Posted by RR80

3d is the best looking in the front lip market!!

+1

These photos are cool.

Arqray exhaust is cool too.

08-04-2011, 03:07 AM	#46
AsiaKid Lieutenant 54 Rep 560 Posts Drives: GTR/Gallardo Spyder/X5 Join Date: Jul 2011 Location: Hong Kong iTrader: (0)	haha..maybe...i see how much yours scrape first..plus..such a long wait for WK.
	Appreciate 0 Quote

08-06-2011, 11:13 PM	#51
IE92 Lieutenant 152 Rep 438 Posts Drives: 2015 F80 M3 Join Date: Feb 2011 Location: San Diego, CA iTrader: (1)	I was at the gas station today when I realized one of the splitters on my 3D design M-sport front lip was shattered. I have absolutely no idea how it happened either. Could have been a pothole or maybe some debris on the freeway. If you are low on coilovers like I am you will definitely have issues with scraping. The 3D M-sport front lip is lower and sticks out further than the paper box you are using. I think not having the splitters would make it much less likely to scrape though.
	Appreciate 0 Quote

08-07-2011, 02:31 AM	#54
AsiaKid Lieutenant 54 Rep 560 Posts Drives: GTR/Gallardo Spyder/X5 Join Date: Jul 2011 Location: Hong Kong iTrader: (0)	yeyes, the protrusion is a factor to consider random note. MLai, i saw you exiting Park Lane
	Appreciate 0 Quote

08-07-2011, 04:35 AM	#56
RC3 Colonel 81 Rep 2,791 Posts Drives: F10 528i Join Date: Jul 2010 Location: Hong Kong iTrader: (0) Garage List 2011 F10 528i [10.00]	Too late to check as I already ordered. But should have plenty of buffer. Let you guys know the real test later. __________________ 2011 F10 528i Black Sapphire / Oyster Black 2000 E46 325ci Cabrio Titanium Silver / Black - retired 1997 E36/7 Z3 Montreal Blue / Black - retired Last edited by RC3; 08-07-2011 at 05:06 AM..
	Appreciate 0 Quote

08-07-2011, 09:22 AM	#57
Jacky328 Lieutenant 30 Rep 418 Posts Drives: 535 F10 Join Date: Feb 2011 Location: Hong Kong iTrader: (0)	RC bro, I think the most concern for the protrusion will be going up a slope. Avoid go to those carpark with big slope will be fine! __________________ 2011 F10 535i Sophisto Grey/Oyster, ACS spring, Forged 1, Michelin PSS, Eisemann Quad-Exhaust, 2013 991 Carrera S PDK, Aqua Blue/Beige, PSE, PDCC, Sport Chrono Package, Paddle Shift Steering Wheel, PDLS--delivery in July2013
	Appreciate 0 Quote

08-07-2011, 01:16 PM	#59
grimlock Colonel 716 Rep 2,003 Posts Drives: F10 N52B30@255PS Join Date: Sep 2010 Location: Hong Kong iTrader: (0)	RC, from the pic it looks like your test placement was quite protruding, so factoring in your margin of safety the extra protrusion should not exceed your margin, you should be safe with your current drop etc.
	Appreciate 0 Quote

08-07-2011, 11:12 PM	#60
EV0LVE Captain 41 Rep 776 Posts Drives: F10 535i SG Join Date: Dec 2010 Location: So Cal iTrader: (1)	Like 78mao said, it's the sides that gets murdered even if you come in perpendicular to a driveway, I hope you dont. See the sides sticks down much further than the center. But it looks like you already bought it, so just be mindful and enjoy. There are also available clear bras that are a bit thicker, that might help. Post pics whenyou get it.
	Appreciate 0 Quote

08-09-2011, 11:34 AM	#64
tinybeammer Private First Class 14 Rep 171 Posts Drives: F10 Join Date: Nov 2010 Location: Singapore iTrader: (0)	Rc3 congrats on your new mods.... __________________ Cheers Tinybeammer
	Appreciate 0 Quote

08-10-2011, 09:51 PM	#65
RR80 Lieutenant 17 Rep 480 Posts Drives: F10 535i Join Date: Nov 2008 Location: Hong Kong, Vancouver iTrader: (0)	3d is the best looking in the front lip market!! Attached Images __________________ 2003 E60 530i - PSS9 Coilover/M Kit/BBS GT-RS 19" wheels - retired 2006 E91 335i - Procede V5/Forge DV & FMIC/Bastuck quad exhaust/P1 Steering Wheel/Sachs Coilover/M kit/19" RS wheels - retired 2011 F10 535i - Stock
	Appreciate 0 Quote