New Downpipes for under $200?

mike@x-ph.com · 04-14-2015, 01:03 PM

Quote:

Originally Posted by badblack550xi

Price ?

Vendor section thread link:

http://f10.5post.com/forums/showthread.php?t=1115129

badblack550xi · 04-14-2015, 01:08 PM

Quote:

Originally Posted by mike@x-ph.com

Vendor section thread link:

http://www.x-ph.com/evolution-racewerks-f10-550i-catless-downpipes/

is that already with 25% off ?

mike@x-ph.com · 04-14-2015, 01:09 PM

Quote:

Originally Posted by badblack550xi

is that already with 25% off ?

Both prices (MSRP and the discounted price) are shown

combatbmw · 04-14-2015, 01:17 PM

Quote:

Originally Posted by mike@x-ph.com

I was confident that they do make it but i could not find it on our website, then i went the ER website and did not find it there. Glad im not going crazy

So what i said above still applies, take advantage of the sale on the ER DP ( ends April 23rd) i will be adding the DP on our website and vendor section today.

Sweet.

Do you want a pic for your site?
I have tons.

pm me ur email.

mike@x-ph.com · 04-14-2015, 01:19 PM

Quote:

Originally Posted by combatbmw

Sweet.

Do you want a pic for your site?
I have tons.

pm me ur email.

It would be highly appreciated !!
my email is mike@x-ph.com

Azimmerlyjr · 04-21-2015, 09:25 AM

Quote:

Originally Posted by spyroz

idk... what about the fitment tho, anyone want to be Ginny-pig

I may for fun...

Azimmerlyjr · 04-21-2015, 09:31 AM

Quote:

Originally Posted by spyroz

idk... what about the fitment tho, anyone want to be Ginny-pig

its for 6cyl nevermind lol

///M5Driver · 04-28-2015, 09:30 AM

Ok well flame suit on.. I purchased a pair after doing some research and finding out they are manufactured by OBX. I've actually had good luck with their products and fitment on n54's, subarus, and mitsu's so I pulled the trigger. That seller's listing is completely wrong on application and I was even pointed to another vendor's listing to show they work for the SUV's only. Either way I took a chance and bought them.

THEY DO NOT FIT. The pipe is too short and the flange is welded offset. This wasn't going to be an issue however I noticed the pipes 'resonators' barely hit the back of the valve covers. If about an inch or so was added up top it would create enough clearance and the flange leveled out they would work. The only other thing is rear o2 placement is questionable however a right angle adapter to space it out should take car of it.

They were cheap and worth a shot... in my case not worth the time to figure out so I purchased a pair of AR's from rborgia

Flange is too far down and it's welded on an angle.

m5james · 09-03-2015, 08:50 PM

What'd you ever do with these? I'm interested in seeing if they'd fit an X5M instead.

I've been researching them for about a week now, writing eBay sellers who eventually gave me a phone number, which in turn ended up being OBX, as you know. After pointing out on www.realoem.com that the factory downpipes fit multiple 4.4l TT platforms, they said they're going to change their ads. I was more interested in the resonator-less version, so I'm curious if they'd have a different fitment. I saw the resonator portion as was curious about tolerances as well, but I'm doing this on an X5M, so I'm going to assume that I'd have more room compared to an F10.

http://www.ebay.com/itm/Becker-Perfo...209bd3&vxp=mtr - resonatorless version, putting the flex pipe in the same location where Agency Power puts them - http://www.ebay.com/itm/AP-X6M-171-A...200708&vxp=mtr

04-28-2015, 09:30 AM	#30
///M5Driver First Lieutenant 30 Rep 307 Posts Drives: gaggle of BMW's Join Date: Aug 2013 Location: Leawood, KS iTrader: (1)	Ok well flame suit on.. I purchased a pair after doing some research and finding out they are manufactured by OBX. I've actually had good luck with their products and fitment on n54's, subarus, and mitsu's so I pulled the trigger. That seller's listing is completely wrong on application and I was even pointed to another vendor's listing to show they work for the SUV's only. Either way I took a chance and bought them. THEY DO NOT FIT. The pipe is too short and the flange is welded offset. This wasn't going to be an issue however I noticed the pipes 'resonators' barely hit the back of the valve covers. If about an inch or so was added up top it would create enough clearance and the flange leveled out they would work. The only other thing is rear o2 placement is questionable however a right angle adapter to space it out should take car of it. They were cheap and worth a shot... in my case not worth the time to figure out so I purchased a pair of AR's from rborgia Flange is too far down and it's welded on an angle.
	Appreciate 0 Quote

09-03-2015, 08:50 PM	#31
m5james Colonel 431 Rep 2,062 Posts Drives: '10 X5M Alpine White on Sakhir Join Date: Aug 2015 Location: Marysville, WA iTrader: (0)	What'd you ever do with these? I'm interested in seeing if they'd fit an X5M instead. I've been researching them for about a week now, writing eBay sellers who eventually gave me a phone number, which in turn ended up being OBX, as you know. After pointing out on www.realoem.com that the factory downpipes fit multiple 4.4l TT platforms, they said they're going to change their ads. I was more interested in the resonator-less version, so I'm curious if they'd have a different fitment. I saw the resonator portion as was curious about tolerances as well, but I'm doing this on an X5M, so I'm going to assume that I'd have more room compared to an F10. http://www.ebay.com/itm/Becker-Perfo...209bd3&vxp=mtr - resonatorless version, putting the flex pipe in the same location where Agency Power puts them - http://www.ebay.com/itm/AP-X6M-171-A...200708&vxp=mtr Last edited by m5james; 09-03-2015 at 08:56 PM..
	Appreciate 0 Quote