|
|
|
2010 2011 BMW 5 Series Forum F10 X-series style 375 20" rims on F10? |
|
Post Reply |
|
Thread Tools | Search this Thread |
11-26-2014, 06:05 PM | #1 |
Second Lieutenant
40
Rep 228
Posts |
X-series style 375 20" rims on F10?
Guys,
I wanted to get a feel of what you all thought of these rims on a F10? Based on the size/offset there should not be an issue. I was going to go 255 35 R20 front and 295 30 R20 rear Available Fitments: 20x9.5 Fronts 20x10.5 Rears Bolt Pattern: 5x120 Offset: +35 mm Color : Gunmetal / Machined Face Hub: 74.1 mm Do you think I would need hub centric ring, I also have 5mm spacers on right now but I don't think I would need them. Please chime in and tell me your thoughts? Too busy? Last edited by TeutonicDan; 12-02-2014 at 08:53 AM.. |
11-26-2014, 09:27 PM | #2 |
Major
478
Rep 1,363
Posts |
I think there is too much going on there.
If you do decide to get them: 1. I used hub rings on my forgestars which have a 74.1 bore 2. Check the offsets on the rear M5 343m wheels. If its 35mm or higher, a 295 on the rear will rub. |
Appreciate
0
|
11-26-2014, 11:50 PM | #3 | |
Second Lieutenant
40
Rep 228
Posts |
Quote:
Although, good call on the 295's because I really want to go wider in the rear. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|