[koanga]

Long story short....

Flooded car, someone monkey with it an make it run by swapping totally different parts till the car started:

modules that they throw at it till they got the car running are:
1. ZGW-High (metal box) - car came with ZWG2-4SK
2. JBBF and the entire fuse panel
3. SZL
4. FRM

All back to original modules, new from the dealer, minus the FRM module

When I`m plugging in the ZGW-02 8SK that I receive from the dealer (FA & vin coded & flex-ray initiate) the car looses EPS, TBX, and left & right headlights modules. If I`ll plug back the "monkey ZGW-High" EPS comes to life.

I did try to flash the ZWG but after SVT_soll and Tal calculation, the ZGW is not in the list. Only 7 or 8 modules are available for flashing

(using e-sys 2.81 & 3.30 & 3.31 with the latest psdz data)
Car is F10 build 08/2015, I-step factory F010-15-07-504.

[platinum6]

hi,
i have the same problem.
i have replace ZGW and loose EPS.

how You solved a problem

[koanga]

Originally Posted by platinum6

hi,
i have the same problem.
i have replace ZGW and loose EPS.

how You solved a problem

Was the wrong zgw module, wrong flash (newer). I end up getting an old zgw module of eBay and code it.