F10 535 Eibach lowering springs

EuroKar · 12-10-2014, 05:01 PM

Just installed some Eibach lowering springs on this clean F10 535.
Simple install. Nice drop with no rubbing issues.

twelve535i · 12-10-2014, 07:50 PM

It looks like a good drop, but hard to see because side views are blurry

EuroKar · 12-10-2014, 08:01 PM

Quote:

Originally Posted by twelve535i

It looks like a good drop, but hard to see because side views are blurry

Thanks. It is.
Doesn't drop as low as H&R springs would.
I'll try to get some clearer pictures

Jayphil · 12-11-2014, 12:00 PM

Hi,

I am looking for a spring setup for next summer that would be a bit less agressive than the H&R. The Eibach seems to be a good candidate.

Was the 535I, Xdrive or RWD. Seems to be difficult to find teh Eibach Xrive version in USA/Canada and mostly only available through Europeen vendors...

EuroKar · 12-11-2014, 12:08 PM

Quote:

Originally Posted by Jayphil

Hi,

I am looking for a spring setup for next summer that would be a bit less agressive than the H&R. The Eibach seems to be a good candidate.

Was the 535I, Xdrive or RWD. Seems to be difficult to find teh Eibach Xrive version in USA/Canada and mostly only available through Europeen vendors...

This vehicle was RWD
I did a search and only could find H&R that fit your XDrive model.
If you are using the factory BMW wheels you will still have good clearance. If you have larger aftermarket wheels then the drop may be too much with H&R

Jayphil · 12-11-2014, 02:52 PM

From my research look like Eibach part number for Xdrive is either

E10-20-022-10-22_371 which drops about 30mm (1.2 inch) Front & Rear
E10-20-022-04-20_367 which drops about 30mm (1.2) front & 25mm Rear (a bit less than 1 inch).
But I have found this in UK not USA or Canada so it might not be available to us...

What was the drop claimed by by Eiback for that RWD 535I?

EuroKar · 12-11-2014, 02:56 PM

Quote:

Originally Posted by Jayphil

From my research look like Eibach part number for Xdrive is either

E10-20-022-10-22_371 which drops about 30mm (1.2 inch) Front & Rear
E10-20-022-04-20_367 which drops about 30mm (1.2) front & 25mm Rear (a bit less than 1 inch).
But I have found this in UK not USA or Canada so it might not be available to us...

What was the drop claimed by by Eiback for that RWD 535I?

Front: 1.0 in
Rear: 0.6 in

http://eibach.com/america/en/perform...ication-lookup

JCat27 · 12-12-2014, 09:27 AM

You should shake the camera around more

...Jk

Post up some more pics when you can get some clear shots

EuroKar · 12-12-2014, 07:13 PM

Quote:

Originally Posted by JCat27

You should shake the camera around more

...Jk

Post up some more pics when you can get some clear shots

lol
Will do

Grzechos · 12-23-2014, 04:40 PM

What wheels are those? What setup? More pictures?

EuroKar · 12-23-2014, 04:57 PM

Quote:

Originally Posted by Grzechos

What wheels are those? What setup? More pictures?

Some aftermarket brand "knock off" BMW rims.
It is a clients car of mine. I only installed the lowering springs for him.

12-10-2014, 05:01 PM	#1
EuroKar Banned 52 Rep 664 Posts Drives: BMW Join Date: Aug 2013 Location: Temecula California iTrader: (0)	F10 535 Eibach lowering springs Just installed some Eibach lowering springs on this clean F10 535. Simple install. Nice drop with no rubbing issues. Attached Images
	Appreciate 0 Tweet Quote

12-10-2014, 07:50 PM	#2
twelve535i Major 478 Rep 1,363 Posts Drives: 2015 X5 35i M Sport Join Date: Feb 2013 Location: New York iTrader: (3)	It looks like a good drop, but hard to see because side views are blurry
	Appreciate 0 Quote

12-11-2014, 12:00 PM	#4
Jayphil Private First Class 63 Rep 176 Posts Drives: 535I xdrive 2011 (M-SPORT) Join Date: Nov 2014 Location: Canada iTrader: (0)	Hi, I am looking for a spring setup for next summer that would be a bit less agressive than the H&R. The Eibach seems to be a good candidate. Was the 535I, Xdrive or RWD. Seems to be difficult to find teh Eibach Xrive version in USA/Canada and mostly only available through Europeen vendors...
	Appreciate 0 Quote

12-11-2014, 02:52 PM	#6
Jayphil Private First Class 63 Rep 176 Posts Drives: 535I xdrive 2011 (M-SPORT) Join Date: Nov 2014 Location: Canada iTrader: (0)	From my research look like Eibach part number for Xdrive is either E10-20-022-10-22_371 which drops about 30mm (1.2 inch) Front & Rear E10-20-022-04-20_367 which drops about 30mm (1.2) front & 25mm Rear (a bit less than 1 inch). But I have found this in UK not USA or Canada so it might not be available to us... What was the drop claimed by by Eiback for that RWD 535I?
	Appreciate 0 Quote

12-12-2014, 09:27 AM	#8
JCat27 Private First Class 13 Rep 152 Posts Drives: 2013 535i Join Date: Jan 2014 Location: Charleston SC iTrader: (1)	You should shake the camera around more ...Jk Post up some more pics when you can get some clear shots __________________ 2013 535i: BMS Intake, JB4, Megan Racing Exhaust, ER Charge Pipe, Hamann Style Diffuser & Front Lip, Carbon Spoiler, Megan Racing Coilovers, 20" Forgestar F14's & Velgen VMB8's Matte Silver, A couple other parts and other little things that I'm forgetting.
	Appreciate 0 Quote

12-23-2014, 04:40 PM	#10
Grzechos Private First Class 246 Rep 153 Posts Drives: E36, E90, F80 M3, F90 M5 Join Date: Apr 2011 Location: Poland iTrader: (0)	What wheels are those? What setup? More pictures?
	Appreciate 0 Quote