Forgestar F14 SDC super deep concave all around (Gunmetal)

spssbmw · 04-11-2018, 11:23 PM

BIMMERPOST / Classifieds

Asking Price:

USD 1,500.00

Location:

✓ Local Pickup Only

Item Interest

UPDATE: Price Drop to $1500.

Car is going back to stock, so selling my set of forgestars f14 super deep concave all around wheels with hankook tires.
Rear are super deep concave. Fronts are also super deep concave as well. Dont remember the exact offset, but fronts were like 11 or 12, and rear was around 32-34.
Tires are Hankook Ventus v12 Evo2 285/30/20 and 245/35/20.
These were on a 2012 550i. Wheels and tires have about 15K miles.
Minor curb rash on two wheels, hardly noticeable. One Rear wheel has one curb rash (See pic 4). One front wheel has 3 minor curb rash (See pic 5,6,7).
Medium sized Curb rash on front left wheel (thanks to Valet Parking :-( , dropping the price cause of this). See last pic

Want a local sale only, sorry no shipping. The car and the wheels are now in Philly. Still up for sale.

Ickdeep · 04-11-2018, 11:39 PM

Would these work on an X-Drive drive-train?

spssbmw · 04-11-2018, 11:43 PM

Quote:

Originally Posted by Ickdeep

Would these work on an X-Drive drive-train?

I dont think so. This is staggered setup. Goes on non-x cars.

Global-F10 · 04-12-2018, 07:14 AM

That’s not true. As long as the rolling diameter is the same, you’re good to go. 285/30/20 and 245/35/20 are with in 0.4%.

IMHO, Front off sets are a tad agrressive.

Free bump for the OP

spssbmw · 04-12-2018, 10:55 AM

Quote:

Originally Posted by Global-F10

That’s not true. As long as the rolling diameter is the same, you’re good to go. 285/30/20 and 245/35/20 are with in 0.4%.

IMHO, Front off sets are a tad agrressive.

Free bump for the OP

Ok. Thats good to know.

Yes, the front are aggressive and stick out a little. But they get a little more flush if you are on lowering springs. These were ordered based on Lacster's setup.
https://f10.5post.com/forums/showthr...&highlight=sdc

lsturbointeg · 04-14-2018, 09:39 AM

Quote:

Originally Posted by Global-F10

That’s not true. As long as the rolling diameter is the same, you’re good to go. 285/30/20 and 245/35/20 are with in 0.4%.

IMHO, Front off sets are a tad agrressive.

Free bump for the OP

True but i've seen quite a few post where guys ended up having codes thrown and ended up taking their wheels off

treyh0lla · 05-17-2018, 06:22 PM

still available?

warpeacelove · 05-17-2018, 07:35 PM

[QUOTE=Global-F10;23047095]That’s not true. As long as the rolling diameter is the same, you’re good to go. 285/30/20 and 245/35/20 are with in 0.4%.

IMHO, Front off sets are a tad agrressive.

Free bump for the OP

[/QUOTE

It is Not “0.4” it is 0.3.

spssbmw · 05-25-2018, 07:52 PM

Quote:

Originally Posted by treyh0lla

still available?

Yes they are still for sale. I was buzy with the move to Philly and did not get a chance to log in here. I am looking for a local sale in or around Philly area.

04-11-2018, 11:23 PM	#1
spssbmw New Member 3 Rep 24 Posts Drives: 550i Join Date: Oct 2011 Location: Philadelphia, PA iTrader: (0)	Forgestar F14 SDC super deep concave all around (Gunmetal) BIMMERPOST / Classifieds Asking Price: USD 1,500.00 Location: ✓ Local Pickup Only Item Interest UPDATE: Price Drop to $1500. Car is going back to stock, so selling my set of forgestars f14 super deep concave all around wheels with hankook tires. Rear are super deep concave. Fronts are also super deep concave as well. Dont remember the exact offset, but fronts were like 11 or 12, and rear was around 32-34. Tires are Hankook Ventus v12 Evo2 285/30/20 and 245/35/20. These were on a 2012 550i. Wheels and tires have about 15K miles. Minor curb rash on two wheels, hardly noticeable. One Rear wheel has one curb rash (See pic 4). One front wheel has 3 minor curb rash (See pic 5,6,7). Medium sized Curb rash on front left wheel (thanks to Valet Parking :-( , dropping the price cause of this). See last pic Want a local sale only, sorry no shipping. The car and the wheels are now in Philly. Still up for sale. Attached Images Last edited by spssbmw; 06-04-2018 at 10:40 AM.. Reason: pointing to the pics in the message description
	Appreciate 0 Tweet Quote

04-11-2018, 11:39 PM	#2
Ickdeep Brigadier General 5716 Rep 4,209 Posts Drives: '13 F10 M5 \| '15 F15 X5 Join Date: Jul 2015 Location: Seattle, WA iTrader: (3) Garage List 2015 BMW X5 [10.00] 2013 BMW M5 [SOLD] [10.00] 2013 BMW 535i [SOLD] [10.00]	Would these work on an X-Drive drive-train? __________________ Stage 2 Tune BPM \| Fabworx DP \| SSP Performance Clutch \| Muffler & Resonator Delete Dinan Adjustable Springs \| Powder Coated 343 Wheels \| F&R Spacers \| RW Carbon Front Lip & Diffuser Sold!
	Appreciate 0 Quote

04-12-2018, 07:14 AM	#4
Global-F10 Private 27 Rep 73 Posts Drives: 14’ 535 E36M3 Join Date: Mar 2018 Location: RI iTrader: (1)	That’s not true. As long as the rolling diameter is the same, you’re good to go. 285/30/20 and 245/35/20 are with in 0.4%. IMHO, Front off sets are a tad agrressive. Free bump for the OP
	Appreciate 0 Quote

05-17-2018, 06:22 PM	#7
treyh0lla Registered 0 Rep 1 Posts Drives: 2012 550i Join Date: May 2018 Location: sf iTrader: (0)	still available?
	Appreciate 0 Quote

05-17-2018, 07:35 PM	#8
warpeacelove Lieutenant 134 Rep 487 Posts Drives: 550i Join Date: Feb 2018 Location: NY iTrader: (6)	[QUOTE=Global-F10;23047095]That’s not true. As long as the rolling diameter is the same, you’re good to go. 285/30/20 and 245/35/20 are with in 0.4%. IMHO, Front off sets are a tad agrressive. Free bump for the OP [/QUOTE It is Not “0.4” it is 0.3.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search