[Simple5]

So, I got my 602m wheels modded. The fronts fit great and the rears were a 20x10 et19. I had the rear pad shaved with inserts to 20x10 et27. The guy said there maybe between a 1/4 too 1/2 inch poke.

I could leave it alone, pull my fenders, stretch a tire, or go negative on the camber.

So how much poke is too much?

[spyroz]

This much is Acceptable

[spyroz]

Originally Posted by Simple3

So, I got my 602m wheels modded. The fronts fit great and the rears were a 20x10 et19. I had the rear pad shaved with inserts to 20x10 et27. The guy said there maybe between a 1/4 too 1/2 inch poke.

I could leave it alone, pull my fenders, stretch a tire, or go negative on the camber.

So how much poke is too much?

I think you got the M6 wheels, the offset seem a little too aggressive, the competition m5 pkg wheels should be around 26-28mm on the rear.

[lsturbointeg]

got pictures as far as poking with your setup?

[Simple5]

Originally Posted by spyroz

I think you got the M6 wheels, the offset seem a little too aggressive, the competition m5 pkg wheels should be around 26-28mm on the rear.

I machined the rears down. The new offset is et27.

[EL Jeffe 5]

when it starts to effect handling and performance that's red line for me.