| BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
|
|
| 06-04-2016, 10:03 PM | #1 |
|
Enlisted Member
 0
Rep 32
Posts |
TPMS change in 2014
According to the Dinan TPMS spec sheet, BMW changed the TPMS sensors in 03.2014 to 36 10 6 798 872 from the previous generation 9.2010 to 2.2014 part number 36 10 6 856 227. Other than swapping the sensors, is there anything else that can be done to make the new part number work on a 2013 550i? If I need to swap out the old for the new, is it worth taking my old ones off, which will require a dismount/remount on two sets, or buy new ones? I read that it's possible to change TPMS without a dismount, but not sure if it is possible with runflats due to the stronger sidewall.
Any advice is appreciated. Thanks |
| 06-05-2016, 08:17 PM | #2 |
|
Enlisted Member
0
Rep 32
Posts |
The TPMS sensors on my new wheels were wrong, they were for the 3 and 4 series.
However, does anyone know if both the 227 and 872 parts will work on a 2013? I haven't found any definitive answers. Thanks |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
