![]() |
![]()
|
![]() |
![]() |
2010 2011 BMW 5 Series Forum F10
![]() |
![]() |
Post Reply |
|
Thread Tools | Search this Thread |
03-23-2012, 10:41 AM | #1 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
BMS Jack Pad Adapter - Review
I just received my BMS Jack Pad Adapter. Their website doesn't list the F10 fitment, but the BMS guys said it should fit. The width and length are 1/4" and 1/8" smaller than the F10's jack pad cavity. However, the height is perfect and the circular base doesn't touch the edge of the plastic jack pad (which is good, so you can't tear up the jack pad while jacking the car up). Just wrap the adapter with 1/8" worth of electrical tape if you want a tight fit, otherwise it should work just fine out of the box. BMS says it should be a loose fit anyways.
I used this on my 535i and E70 without any modification (electrical tape mod). It worked perfectly. This is a made from solid anodized black biillet aluminum and made in the U.S. of A. I highly recommend this product for our F10s, especially with the 3T jack from Harbor Freight tools. ![]() Last edited by JNoSol; 05-06-2012 at 09:26 PM.. |
03-23-2012, 03:32 PM | #2 |
Major
![]() ![]() 116
Rep 1,346
Posts
Drives: 2011 E92 335 M-Sport
Join Date: Feb 2010
Location: LA
|
How much is this?
__________________
![]() |
Appreciate
0
|
03-23-2012, 04:33 PM | #4 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
$19 + $7 shipping.
http://burgertuning.com/BMW_jack_pad_adapter.html |
Appreciate
0
|
03-23-2012, 04:34 PM | #5 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
|
Appreciate
0
|
03-23-2012, 04:41 PM | #6 |
Major
![]() ![]() 116
Rep 1,346
Posts
Drives: 2011 E92 335 M-Sport
Join Date: Feb 2010
Location: LA
|
I've just been using this. Seems to work but obviously this is a better fit.
![]()
__________________
![]() |
Appreciate
0
|
03-23-2012, 04:47 PM | #7 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
Nice setup. I've seen guys making these with a hockey puck.
![]() With the BMS Jack Pad Adapter, the circular base will not touch the plastic jack pad (about 1/16" gap). This will relieve stress off the edge of the plastic jack pad, which cracked on me w/o this solution. |
Appreciate
0
|
03-23-2012, 04:48 PM | #8 | |
Major
![]() ![]() 116
Rep 1,346
Posts
Drives: 2011 E92 335 M-Sport
Join Date: Feb 2010
Location: LA
|
Quote:
![]()
__________________
![]() |
|
Appreciate
0
|
03-23-2012, 05:30 PM | #9 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
You don't have to modify it, I just like it snugged. BMS says it's meant to have a little play in fitment. Reverse Logic's seems to be a 2 piece, while BMS is a single block of Billet Aluminum. They both will work just fine.
![]() |
Appreciate
0
|
03-23-2012, 05:45 PM | #10 |
Major
![]() ![]() 116
Rep 1,346
Posts
Drives: 2011 E92 335 M-Sport
Join Date: Feb 2010
Location: LA
|
The color threw me off. I thought the BMS was rubber, didn't realize it was anodized aluminum. Definitely need to get two of these, as I have 2 floor jacks and 2 Bimmers.
__________________
![]() |
Appreciate
0
|
03-23-2012, 07:42 PM | #11 |
Colonel
![]() 192
Rep 2,191
Posts |
|
Appreciate
0
|
03-24-2012, 08:02 AM | #12 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
|
Appreciate
0
|
05-06-2012, 09:25 PM | #13 |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
By the way, I used this on my 535i and E70 for oil changes without any modification (electrical tape mod, as originally thought). It worked perfectly.
|
Appreciate
0
|
04-26-2015, 05:07 PM | #15 |
Enlisted Member
![]() ![]() 8
Rep 36
Posts
Drives: 2014 F10 LCI 550i Luxury Line
Join Date: Apr 2014
Location: Cincinnati, OH 45231 USA
|
These jack pad adapters are great for initially lifting the car with a floor jack, but where exactly do you place the jack stands? Do you put them just fore and aft of the jack pads where the plastic underbody fairing is flat against the underside of the rocker panel, or is there another place? I've checked here and on YouTube and can't find any how-to's for the proper lifting points on an F10/F11. All I find is how to lift the car with a floor jack using the jack pads. Thanks to anyone who knows.
__________________
Current stable:
2002 Nissan Pathfinder SE 4WD 5MT 2004 Mazda 6S Wagon 5MT 2014 BMW 550i Luxury Line Former: 2011 BMW 535i 6MT / 2012 BMW 550i Sport 6MT / 2014 BMW 535i M-sport 6MT |
Appreciate
0
|
04-26-2015, 09:44 PM | #16 | |
Brigadier General
![]() ![]() 1383
Rep 3,834
Posts |
Quote:
__________________
Daily: G12 750 MSPORT Weekend Car: E90 M3
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
adapter, bms, jack pad |
|
|