|
|
|
2010 2011 BMW 5 Series Forum F10 BMW F10 535xi Tankentlüftungsventil Code 191004 / 191B04 |
|
Post Reply |
|
Thread Tools | Search this Thread |
04-29-2022, 05:51 AM | #1 |
Registered
0
Rep 1
Posts |
BMW F10 535xi Tankentlüftungsventil Code 191004 / 191B04
Hello, I'm new here and unfortunately I have a problem with my bmw f10 535xi from 2011. first of all thanks for the reception, i'm from germany and my f10 is from america and that's why i'm here. And I have to apologize, I write everything via Google translator. So now to my problem. Bought the car with no problems and series 306hp. Then I optimized the car with MHD on Stage 1. After optimizing, the engine control light lights up: error code 191004 tank ventilation valve control, power interruption and error 191B04 tank ventilation system shut-off valve control and line interruption. Drove to bmw and installed the tank vent valve with hoses (newly purchased US version). Unfortunately no improvement. The car runs a bit rough and the revs are not much higher when stationary, but it is higher. If I switch off the engine and start it again, it runs extremely rough for the first few minutes, you can even tell that when you're sitting in the car. Cable harness has already been tackled, no damage to the plug or cable. I'm grateful for every tip. with friendly greetings from Germany
|
02-05-2024, 11:03 PM | #2 |
Registered
0
Rep 2
Posts
Drives: 2012 BMW 535i
Join Date: Dec 2023
Location: Florida
|
hello, did you solve that issue? I have the same one
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|