[j3o5]

What up guys, I'm new to this forum and joined looking for some help. I recently upgraded to the Bavsound stage 1, bav subs and bimmertech amp. My problem is now I'm completely lost when it comes to tuning it. This DSP is bad ass and has a million different settings to tune it to your needs, I just have no idea how to use it.
If any members are willing to give me some advise or even meet up for some pointers and show me how to use it that'd be great, or if anyone already has a tune file that they're willing to share that would work too.
Beer is on me and I'll come to you, any takers shoot me a pm. Thanks

[lsturbointeg]

i would definitley send a pm to Nelson from bimmertech

[j3o5]

I have actually, he told me he has no
tune for F10. I also reached out to bav and now waiting to hear back from them

[msfive]

Yea! You got to play with one speaker @ a time! Also need a 9-10 foot usb cable & seat in front for best results!

[lsturbointeg]

Originally Posted by msfive

Yea! You got to play with one speaker @ a time! Also need a 9-10 foot usb cable & seat in front for best results!

+1

when i tune my setup in my Titan i usually go somewhere where there's no noise. i'm running Focal K2 Powers and with those i had to tweak the highs a bit so they're not so bright. start with the fronts...play around with the EQ settings from the DSP. make sure crossovers are set accordingly. what might sound good to me might sound like crap to you! so just adjust until you find that desired sound. usually my fronts gains are higher than my rears since the rears are just fills. i had to play around with the crossover settings from 80hz and finally set them to 100hz.

also, did you upgrade the 8's under the seat to Bav's as well or are they still factory?

[Nelson@BimmerTech]

Originally Posted by j3o5

I have actually, he told me he has no
tune for F10. I also reached out to bav and now waiting to hear back from them

I'm only 3.5 hours away

[j3o5]

Thanks for the replies guys. I'm still looking for some help... I've done the bav stage 1, bav subs, and bimmertech pp82dsp. No doubt the pp82 has the power and quality I'm looking for, I'm just lost tuning. I'm not familiar with the dsp's settings and different sound characteristics. I've played with it a lot and still not reaching the potential I know this thing has.
After the bav upgrades were made I saw big improvements in sound, what I was lacking was power. I'm just looking for similar sound with MORE power. I've spent hours tuning and haven't got the sound I'm looking for. Both Bav and bimmertech take forever to get back to me, almost 2 months of owning the amp and I'm ready to go back to stock because I can't get the sound right.
Still looking for some help and advise for an experienced user

[lsturbointeg]

Like Nelson said he's 3.5 hrs away...I'd take a trip to see him since it is his product and would be the first to know how to tune it vs someone else charging u stupid money for a product they're not familiar with.

[Nelson@BimmerTech]

Originally Posted by j3o5

Thanks for the replies guys. I'm still looking for some help... I've done the bav stage 1, bav subs, and bimmertech pp82dsp. No doubt the pp82 has the power and quality I'm looking for, I'm just lost tuning. I'm not familiar with the dsp's settings and different sound characteristics. I've played with it a lot and still not reaching the potential I know this thing has.
After the bav upgrades were made I saw big improvements in sound, what I was lacking was power. I'm just looking for similar sound with MORE power. I've spent hours tuning and haven't got the sound I'm looking for. Both Bav and bimmertech take forever to get back to me, almost 2 months of owning the amp and I'm ready to go back to stock because I can't get the sound right.
Still looking for some help and advise for an experienced user

I gave you the option to drive to Orlando to create a tune for it. We can't create a tune for it unless we have a F10 equip with Bav speakers.

[andrewtanko]

Hey Nelson, don't you guys have an installer in Ft. Lauderdale as well?

[Nelson@BimmerTech]

Originally Posted by andrewtanko

Hey Nelson, don't you guys have an installer in Ft. Lauderdale as well?

Technic is in Ft. Lauderdale.

[andrewtanko]

Thank you for confirming it!

[j3o5]

Thank you guys for the feed back,
600+ miles from where I'm at to Orlando would be tough. Ft. Lauderdale is much more doable.

Nelson would you mind sending me the information for your dealer in ft lauderdale?
Thanks again for your help

[Nelson@BimmerTech]

Originally Posted by j3o5

Thank you guys for the feed back,
600+ miles from where I'm at to Orlando would be tough. Ft. Lauderdale is much more doable.

Nelson would you mind sending me the information for your dealer in ft lauderdale?
Thanks again for your help

Unfortunately Technic doesn't create tunes. He only installs our rear view camera kits and other retrofits.

[lsturbointeg]

Originally Posted by j3o5

Thank you guys for the feed back,
600+ miles from where I'm at to Orlando would be tough. Ft. Lauderdale is much more doable.

Nelson would you mind sending me the information for your dealer in ft lauderdale?
Thanks again for your help

Sounds like a nice road trip! You're in Florida... not here in Ohio where it's snowing

[msfive]

When your music don't sound right could be a long trip!

[lsturbointeg]

Originally Posted by msfive

When your music don't sound right could be a long trip!

Lol!

[Jamesmick]

I've got a 2012 535i also with Stage 1 Bavsound and the Ghost Woofer and the bimmertech amp. Would love a good tune file. The tune file I have now is a bit too high and lacking in mids and lows. I've tried to tune myself, but apparently I suck at it! haha.

If anyone has a good tune file, I'd love to load it up and give it a run!