[Hellboy550i]

I want to change my f10 suspension but I can’t find a single video or after
Market , where they give or sell full strut assembly. Did anyone found or changed a strut assembly for f10?

[ChiNorm]

Look at Tire Rack.

Good luck.

[SWFLf10]

Originally Posted by Hellboy550i

I want to change my f10 suspension but I can't find a single video or after
Market , where they give or sell full strut assembly. Did anyone found or changed a strut assembly for f10?

I got my parts through FCP online and I ended up doing almost everything on the suspension myself on my 535 front and rear. Just have one arm on the front I didn't end up swapping out. Pay attention to torque values, and make sure to only fully torque the bolts going through rubber bushings that need to be "loaded" or "under stress" with the weight of the vehicle on them or with them forced into their regular ride height alignment. Otherwise you risk prematurely wearing out the new bushings. Take your time and expect issues, because you can never be fully ready for the unexpected issues that always come up.

[Hellboy550i]

Originally Posted by SWFLf10

I got my parts through FCP online and I ended up doing almost everything on the suspension myself on my 535 front and rear. Just have one arm on the front I didn't end up swapping out. Pay attention to torque values, and make sure to only fully torque the bolts going through rubber bushings that need to be "loaded" or "under stress" with the weight of the vehicle on them or with them forced into their regular ride height alignment. Otherwise you risk prematurely wearing out the new bushings. Take your time and expect issues, because you can never be fully ready for the unexpected issues that always come up.

Originally Posted by ChiNorm

Look at Tire Rack.

Good luck.

i tried to check in fcp but they dont have a full strut assembly , if anyone have link that you bought can u post it here so i can see ..

[DStrole]

Check out strutmonkey.com
I just ordered shocks and struts with new springs and everything comes fully assembled and torqued to spec. For my control arms, I went with FCP. Haven't swapped it all out yet, but planning to in the next week or two.

[StradaRedlands]

Hopefully you don't have active suspension... those prices are CRAZY and no aftermarket options. Dreading when I may need to replace them.

[Hellboy550i]

Originally Posted by DStrole

Check out strutmonkey.com
I just ordered shocks and struts with new springs and everything comes fully assembled and torqued to spec. For my control arms, I went with FCP. Haven't swapped it all out yet, but planning to in the next week or two.

Can u send me the link , cause I check in fcp too I only see the struts …not full assembly

[Hellboy550i]

Originally Posted by StradaRedlands

Hopefully you don't have active suspension... those prices are CRAZY and no aftermarket options. Dreading when I may need to replace them.

I have normal suspension …

[DStrole]

Originally Posted by Hellboy550i

Can u send me the link , cause I check in fcp too I only see the struts …not full assembly

www.strutmonkey.com
Fill their form out on their site and they will have a quote to you in a day or two.

[Hellboy550i]

Originally Posted by DStrole

www.strutmonkey.com
Fill their form out on their site and they will have a quote to you in a day or two.

Thanks appreciate it