Pure Stage 2 Turbo Install & Review

WaqasRiyami · 02-17-2018, 02:16 AM

Good morning Guys,

-I have been Following Stück & AZ-MCRacer install for a While now.. and now it's my turn to share my Review & Experience..

-Many thanks to Peter@Pure Turbos for answering all of my questions very fast & Confirming my Order , Now shipping from pure is left - Shout-Out to peter so he can make it happen faster..

-Ordered Items from pure:
N55 Stage 2 turbo
DV+
N55 Install kit

-And Since Pure Dont Have F10 Inlets, i Ordered Custom Hi-Flow inlet from : AZ-MCRacer ( He's full of experience and owns a great modified F10)

-The Inlet is on its way & now The only thing left is i am Waiting for Peter@Pure to Ship the Turbo, Shout-out to peter so he can make it happen faster.

-Just Confirmed with the workshop that will make the install:
It will take 2 Full Days & he told me he will take the engine down , perform the install , and put it back in. He Says This way it will be a clean install as we can check that we installed everything and tightened all the connections & check if anything else needs to be changed or fixed in the way & check for leaks.

-I am already on a Tuned BEF with TREBILA for my build & I will be Further Tuning The BEF with TREBILA after installing the Turbo to hit more boost targets with better timing.

-I am thrilled to receive the PS2 and install it and Test it, will update my Review & share my experience with the forum.

-This is a DataZap link to my Last JB4 Log before PS2 Install.
https://datazap.me/u/waqasriyami/las...log=0&data=1-4

-I Have Never Dyno'd my Car

-No EXX Fuel and No Meth : Will only be Using (98RON/93OCT)

-My Car : 2011 F10 535i N55 PWG AT | JB4 ISO - BT.Rv3 | TREBILA BEF Tune | BMS Intake | ER 4" CLess D/Pipe | ER 3" Charge-Pipe | Wagner-Tuning Competition Intercooler |

-Coming Soon: | Pure Stage 2 Turbo | Custom High Flow Inlet | GFB DV+ |

-Pic Of the Car :

View post on imgur.com

AZ-MCRacer · 02-17-2018, 10:40 AM

Awesome to see you getting it done!

WaqasRiyami · 02-18-2018, 12:31 AM

Quote:

Originally Posted by AZ-MCRacer

Awesome to see you getting it done!

Thanks

Wish i Had some more $$$ in my budget, i would of taken Fuel-It Stage 2 LPFP.. But that can happen later on , Lets see how this goes

I am waiting for any reply from pure that the turbos are ready and will be shipped

WaqasRiyami · 02-18-2018, 12:40 PM

I did it !! bought the , Fuel-It Stage 2 LPFP & N20 3.5bar TMAP Sensor

ey2001 · 02-18-2018, 01:53 PM

Quote:

Originally Posted by WaqasRiyami

I did it !! bought the , Fuel-It Stage 2 LPFP & N20 3.5bar TMAP Sensor

Nice!!! I would have done the same..... and get in trouble later from the wife...

WaqasRiyami · 02-18-2018, 02:10 PM

Quote:

Originally Posted by ey2001

Nice!!! I would have done the same..... and get in trouble later from the wife...

I Swear This is what i did haha

, Hope its all worth it...

WaqasRiyami · 02-20-2018, 12:16 AM

Thank You Peter@PureTurbos The PS2 is on its way..

ey2001 · 02-20-2018, 12:23 AM

Quote:

Originally Posted by WaqasRiyami

Thank You Peter@PureTurbos The PS2 is on its way..

If you don't mind me ask... how much is the whole thing going to cost?

WaqasRiyami · 02-20-2018, 12:26 AM

Quote:

Originally Posted by ey2001

If you don't mind me ask... how much is the whole thing going to cost?

installation ? or all the mods prices ??

ey2001 · 02-20-2018, 12:28 AM

Quote:

Originally Posted by WaqasRiyami

Quote:

Originally Posted by ey2001

If you don't mind me ask... how much is the whole thing going to cost?

installation ? or all the mods prices ??

The turbo, fuel it, piping and tuning... are you going to install it or a shop?

WaqasRiyami · 02-20-2018, 01:30 AM

Quote:

Originally Posted by ey2001

If you don't mind me ask... how much is the whole thing going to cost?

Quote:

Originally Posted by ey2001

The turbo, fuel it, piping and tuning... are you going to install it or a shop?

Turbo - $2,500.00
DV+ - $135.00
Hi-Flow Inlet From(AZ-MCRacer) - $450.00
Pure Installation Kit - $220.00
Fuel-IT Stage 2 LPFP - $749.00
N20 3.5Bar TMAP - $110.00

Total Mod's - $4165.00

Tuning: Since I Already Have TREBILA BEF Tune, I will only need it to be Modified for the Larger Turbo So it will only cost me - $125.00

Installation : It will be in a shop, I was already quoted $500-$600 - for the Full Install.

Total Price - $4900

ey2001 · 02-20-2018, 01:33 AM

Nice!!! The install is a lot cheaper than I thought

Stück · 02-20-2018, 07:03 PM

R&R of a N55 turbo in a F10 pays for 13.5hr per BMW KSD.

$5-600 is not realistic pricing in the US at a legitimate BMW shop.

jooobi3 · 02-20-2018, 07:07 PM

Quote:

Originally Posted by Stück

R&R of a N55 turbo in a F10 pays for 13.5hr per BMW KSD.

$5-600 is not realistic pricing in the US at a legitimate BMW shop.

Yeah I was going to said.. That's ridicilious cheap but than I realized he's from out of state.

ezaircon4jc · 02-20-2018, 07:59 PM

Isn't about $5K the difference in the pre-owned market between a 535 and a 550??

WaqasRiyami · 02-21-2018, 07:28 AM

The Custom Hi-Flow inlet from (AZ-MCRacer) Has Arrived

It Looks Great & Well Build, And it surely looks like there will be no restrictions from the Inlet Anymore

Many Thanks AZ-MCRacer..

Now Waiting For The PS2 (Arrives Tomorrow) & Stage 2 LPFP Upgrade ( Arrives after 4 Days) & N20 3.5 Bar TMap ( Arrives after 5 Days) - To arrive and will be ready to start the install

$howtime456 · 02-21-2018, 10:34 AM

is it just 1 piece? i think me and AZ talked earlier but it totally forgot

WaqasRiyami · 02-21-2018, 11:12 AM

Yes its only one pices, it will take the same place of the stock inlet and uses the stock clamps to hold

Dollar Bill 535 · 02-21-2018, 11:46 AM

Nice, Waqas! You really caught the mod bug quick and you're going all in. Keep posting up info to share on progress.

Also, I'm interested in getting a Trebila BEF like yours. Since we have the same car and mods, maybe I can get a deal. 🤑

WaqasRiyami · 02-21-2018, 11:59 AM

Quote:

Originally Posted by Dollar Bill 535

Nice, Waqas! You really caught the mod bug quick and you're going all in. Keep posting up info to share on progress.

Also, I'm interested in getting a Trebila BEF like yours. Since we have the same car and mods, maybe I can get a deal. ��

Thanks
I Will try to post everything step by step..

Dont think about trebila's tune, Just go for it ! Its is the best bang to buck mod you will get on the market ! My car changed after the BEF and thats with Stock turbos.

Please read my full Review of Trebila tune here : http://www.n54tech.com/forums/showthread.php?t=51312

WaqasRiyami · 02-22-2018, 04:26 AM

Puer's Shipment Just Arrived

Pure Stage 2 Turbo
GFB DV+
N55 Turbo Installation Kit

Now Have To Wait For Stage 2 LPFP & N20 3.5Bar TMAP

I've Set The Installation Date with the Workshop As 04/03/2018

AZ-MCRacer · 02-22-2018, 11:00 AM

Good stuff!

02-17-2018, 02:16 AM	#1
WaqasRiyami Private 46 Rep 42 Posts Drives: BMW F10 ( 535i ) Join Date: May 2017 Location: Middle East , Oman iTrader: (0)	Pure Stage 2 Turbo Install & Review - Its Happening ! Good morning Guys, -I have been Following Stück & AZ-MCRacer install for a While now.. and now it's my turn to share my Review & Experience.. -Many thanks to Peter@Pure Turbos for answering all of my questions very fast & Confirming my Order , Now shipping from pure is left - Shout-Out to peter so he can make it happen faster.. -Ordered Items from pure: N55 Stage 2 turbo DV+ N55 Install kit -And Since Pure Dont Have F10 Inlets, i Ordered Custom Hi-Flow inlet from : AZ-MCRacer ( He's full of experience and owns a great modified F10) -The Inlet is on its way & now The only thing left is i am Waiting for Peter@Pure to Ship the Turbo, Shout-out to peter so he can make it happen faster. -Just Confirmed with the workshop that will make the install: It will take 2 Full Days & he told me he will take the engine down , perform the install , and put it back in. He Says This way it will be a clean install as we can check that we installed everything and tightened all the connections & check if anything else needs to be changed or fixed in the way & check for leaks. -I am already on a Tuned BEF with TREBILA for my build & I will be Further Tuning The BEF with TREBILA after installing the Turbo to hit more boost targets with better timing. -I am thrilled to receive the PS2 and install it and Test it, will update my Review & share my experience with the forum. -This is a DataZap link to my Last JB4 Log before PS2 Install. https://datazap.me/u/waqasriyami/las...log=0&data=1-4 -I Have Never Dyno'd my Car -No EXX Fuel and No Meth : Will only be Using (98RON/93OCT) -My Car : 2011 F10 535i N55 PWG AT \| JB4 ISO - BT.Rv3 \| TREBILA BEF Tune \| BMS Intake \| ER 4" CLess D/Pipe \| ER 3" Charge-Pipe \| Wagner-Tuning Competition Intercooler \| -Coming Soon: \| Pure Stage 2 Turbo \| Custom High Flow Inlet \| GFB DV+ \| -Pic Of the Car : View post on imgur.com View post on imgur.com __________________ 2011 F10 535i N55 PWG 8AT \| "Pureboost.de Tune" + MHD Flasher \| xHP Stage 3 Transmission Tune \| N20 3.5bar TMAP Sensor \| Pure Stage 2 Turbo \| GFB DV+ \| Fuel-It Stage 2 LPFP \| 93 Octane Fuel \| BMS Intake \| ER 4" CLess D/Pipe \| ER 3" Charge-Pipe \| Wagner-Tuning Competition Intercooler \| Custom Turbo Inlet Pipe \| https://i.imgur.com/iR4wm3I.jpg \| Last edited by WaqasRiyami; 03-08-2018 at 03:06 AM..
	Appreciate 2 gabypr150.00 ey2001310.00 Tweet Quote

02-17-2018, 10:40 AM	#2
AZ-MCRacer First Lieutenant 306 Rep 332 Posts Drives: 2022 G82 M4, 2013 F10 N55 Join Date: Oct 2016 Location: Tempe, AZ iTrader: (0)	Awesome to see you getting it done! __________________ 2022 G82 M4 - Isle of Man Green w/Kyalami Carbon Bucket Seats - MST Intakes, SSR Downpipes, JB4, AWE Exhaust. 2013 F10 N55 (535i), Pure Stage 2, Fuel-It PI Platinum, Fuel-It Stage 2 LPFP, BootMod3, Custom Turbo Inlet, Custom Cary Jordan Tune, More.. SOLD! 1999 e36 M3 - Estoril Blue - Track Car - S54 Swapped
	Appreciate 0 Quote

02-18-2018, 12:40 PM	#4
WaqasRiyami Private 46 Rep 42 Posts Drives: BMW F10 ( 535i ) Join Date: May 2017 Location: Middle East , Oman iTrader: (0)	I did it !! bought the , Fuel-It Stage 2 LPFP & N20 3.5bar TMAP Sensor
	Appreciate 0 Quote

02-20-2018, 12:16 AM	#7
WaqasRiyami Private 46 Rep 42 Posts Drives: BMW F10 ( 535i ) Join Date: May 2017 Location: Middle East , Oman iTrader: (0)	Thank You Peter@PureTurbos The PS2 is on its way..
	Appreciate 0 Quote

02-20-2018, 01:33 AM	#12
ey2001 Captain 310 Rep 716 Posts Drives: F10 535i 6spd Join Date: Apr 2007 Location: la iTrader: (0)	Nice!!! The install is a lot cheaper than I thought
	Appreciate 0 Quote

02-20-2018, 07:03 PM	#13
Stück Major 801 Rep 1,214 Posts Drives: F15 X5, E46 330i, R56 Mini.S Join Date: May 2016 Location: Houston, TX iTrader: (4)	R&R of a N55 turbo in a F10 pays for 13.5hr per BMW KSD. $5-600 is not realistic pricing in the US at a legitimate BMW shop.
	Appreciate 0 Quote

02-20-2018, 07:59 PM	#15
ezaircon4jc Major General 4482 Rep 5,362 Posts Drives: 2019 540i M Sport Join Date: Jan 2015 Location: San Diego iTrader: (0)	Isn't about $5K the difference in the pre-owned market between a 535 and a 550??
	Appreciate 0 Quote

02-21-2018, 07:28 AM	#16
WaqasRiyami Private 46 Rep 42 Posts Drives: BMW F10 ( 535i ) Join Date: May 2017 Location: Middle East , Oman iTrader: (0)	The Custom Hi-Flow inlet from (AZ-MCRacer) Has Arrived It Looks Great & Well Build, And it surely looks like there will be no restrictions from the Inlet Anymore Many Thanks AZ-MCRacer.. Now Waiting For The PS2 (Arrives Tomorrow) & Stage 2 LPFP Upgrade ( Arrives after 4 Days) & N20 3.5 Bar TMap ( Arrives after 5 Days) - To arrive and will be ready to start the install Attached Images
	Appreciate 2 ey2001310.00 gabypr150.00 Quote

02-21-2018, 10:34 AM	#17
$howtime456 Major 301 Rep 1,230 Posts Drives: BMW 640i Join Date: Mar 2017 Location: NY iTrader: (0)	is it just 1 piece? i think me and AZ talked earlier but it totally forgot __________________ N55 GENERAL David Shoup Tuned Fully Built By Miami Engines/Project Motorworks Precision 6266 On Steroids
	Appreciate 0 Quote

02-21-2018, 11:12 AM	#18
WaqasRiyami Private 46 Rep 42 Posts Drives: BMW F10 ( 535i ) Join Date: May 2017 Location: Middle East , Oman iTrader: (0)	Yes its only one pices, it will take the same place of the stock inlet and uses the stock clamps to hold
	Appreciate 0 Quote

02-21-2018, 11:46 AM	#19
Dollar Bill 535 Banned 9 Rep 59 Posts Drives: F10 535i N55 Join Date: Mar 2017 Location: Florida iTrader: (0)	Nice, Waqas! You really caught the mod bug quick and you're going all in. Keep posting up info to share on progress. Also, I'm interested in getting a Trebila BEF like yours. Since we have the same car and mods, maybe I can get a deal. 🤑
	Appreciate 0 Quote

02-22-2018, 04:26 AM	#21
WaqasRiyami Private 46 Rep 42 Posts Drives: BMW F10 ( 535i ) Join Date: May 2017 Location: Middle East , Oman iTrader: (0)	Puer's Shipment Just Arrived Pure Stage 2 Turbo GFB DV+ N55 Turbo Installation Kit Now Have To Wait For Stage 2 LPFP & N20 3.5Bar TMAP I've Set The Installation Date with the Workshop As 04/03/2018 Attached Images
	Appreciate 1 gabypr150.00 Quote

02-22-2018, 11:00 AM	#22
AZ-MCRacer First Lieutenant 306 Rep 332 Posts Drives: 2022 G82 M4, 2013 F10 N55 Join Date: Oct 2016 Location: Tempe, AZ iTrader: (0)	Good stuff! __________________ 2022 G82 M4 - Isle of Man Green w/Kyalami Carbon Bucket Seats - MST Intakes, SSR Downpipes, JB4, AWE Exhaust. 2013 F10 N55 (535i), Pure Stage 2, Fuel-It PI Platinum, Fuel-It Stage 2 LPFP, BootMod3, Custom Turbo Inlet, Custom Cary Jordan Tune, More.. SOLD! 1999 e36 M3 - Estoril Blue - Track Car - S54 Swapped
	Appreciate 0 Quote