[ImSW1]

Originally Posted by v12

Sean - could you please post a picture of these?

Have no idea these gauges are.

Youtube clip grabbed from first post.

Sean

[///M ARMY]

Does Alex@alphine do that?

[ImSW1]

Originally Posted by UAM951

Does Alex@alphine do that?

Alex is at a bit of a disadvantage because as a business he really can't just grab a copy of E-Sys and start using it without the possibility of serious repercussions if BMW got word of it (very small chance). His primary tools are probably ISTA/P and D, and those tools kind of limit his options.

You should still ask him. He does great work and you can't beat the deals he has for unlimited coding if you don't want to do it yourself.

Remember what I said earlier. The sport screens are more "show" than "go". No one knows if the readings they give are accurate.

Sean

[v12]

Originally Posted by ImSW1

Youtube clip grabbed from first post.

Sean

Thank you! I prob. would not bother with these.

[dbs600]

Is there a way to "code" the ability to drive the car (in drive or in reverse) from a standstill / stop with the door open (i.e.: to deactivate the "secure the vehicle against rolls" warning / mechanism)?

[ankitpoo]

Originally Posted by dbs600

Is there a way to "code" the ability to drive the car (in drive or in reverse) from a standstill / stop with the door open (i.e.: to deactivate the "secure the vehicle against rolls" warning / mechanism)?

try with seat belt on. i have heard some people in F01 forum on bimmerfest, saying wearing the seat belt lets you drive in reverse with doors open. Let us know. Thanx!

[Prodigius]

Damn man, thanks for the Tips! I ordered an F11 and it should be here on Wednesday. Pictures and details to follow. I am new here so I am still trying to figure out my way around here! thanks, Ciao

[aus]

Originally Posted by itschase

No offense at all - but see it from my angle, I am offering my time, experience and knowhow. I will not also take the time to convince people to accept that. Doubt is normal, but keep in mind that I gain nothing by convincing you to take me up on my offer.

PS: This software is readily available to the avid googler. Compared to NCSExpert, it is comparitively rudimentary to code your own vehicle with an easily built interface cable. When I started coding the E chassis two years ago information and DIY guides were as rare as a humble Californian. Never pay for coding.

It's VERY kind of you to offer your time. Where are you located? My brother in-law is interested.
IMO, $60 for a hour of your time is very reasonable. There are guys who charge MANY hundreds for coding, which is crazy in IMO.

.

[dbs600]

Is there any way to code the car so that when the headlamps turn on automatically, the foglamps turn on too? And if you want to turn off the fog lamps, you can press the button? Thanks!

[535Individual]

I had a map light switch go bad and the dealer installed a new switch board in the front overhead. Then a complete 3+ hour software download was required to initialize the new board. Then the car went into "sleep mode" for 30 minutes to reboot the car. Would these new codes be overwritten by the new software?

[JamRWS6]

Originally Posted by Sab314

I had a map light switch go bad and the dealer installed a new switch board in the front overhead. Then a complete 3+ hour software download was required to initialize the new board. Then the car went into "sleep mode" for 30 minutes to reboot the car. Would these new codes be overwritten by the new software?

Most likely yes.

[Mikeyh718]

Wrong post. Disregard. Sorry