[louieeg]

Morr wheels are known to crack, and mine just happened to crack at the worst spot on the wheel. I can't find a place willing to fix a crack that is this close to a spoke.

So let me know if you have a Morr VS8.2 20"x10.5" laying around. Not sure of the offset since it wasn't provided by Morr.

Also, anybody know of a shop that might still have a Morr VS8.2 available?

Or anybody know a shop willing to fix a crack near a spoke? I rarely drive my car on the highway so I'm willing to take the risk.

[HXS]

Morr has gone out of business for quite some time now. Your best bet would be just to fix it

[The_Transporter]

I have a full set on my car, which I will be parting out to return to stock next week if it doesn’t get any serious bites before then. I would be looking to sell the whole set so not sure if you would be interested but it’s an option if you can’t find another solution. Sorry to hear that happened Man and good luck!

[louieeg]

bump

[bravo261]

keep asking around your local shops...that's not a that bad a crack to fix at all.

looks like a crack sustained from a pothole or similar, right? i've had three cracked spokes that were structural problems, so that i agree couldn't/shouldn't be fixed

[louieeg]

I don’t even remember hitting a pothole. I found a shop willing to repair the crack. I’ll know how it looks later today. They said the wheel is still round and is balanced, no signs of a bend or hard impact. I suspect just a weak wheel.

[louieeg]

The crack is fixed. You can’t even see the weld. The only thing that’s not perfect is the clear coat. But I’m happy with the result.

Still looking for any VS8.2 for spares. I know there’s a good chance the wheel may crack again.