[lsturbointeg]

Originally Posted by Teddylongtooth

The carbon fiber on that lip looks great, how long before you get I put on?

In the middle of the week when I'm off

[exia_m3]

that rear diffuser is for a msport rear?
and with the 3D lip you're getting you're adding a splitter to it?
do you have pics of the splitter before you install on the 3D lip?
might go your route!

[lsturbointeg]

Originally Posted by xenoz535

that rear diffuser is for a msport rear?
and with the 3D lip you're getting you're adding a splitter to it?
do you have pics of the splitter before you install on the 3D lip?
might go your route!

i have the msport rear bumper in my storage and will get it on after winter but yes the diffuser will work on both Msport or M5 rear bumper. here's a picture of the carbon spoiler with the polyurethane splitter. i really think the combo of the two compliment each other very well. i'm still making adjustments to the splitter on how much of it i want to show. i don't want too much lip showing at the same time i don't want not enough lip you know what i mean?

[Black5]

I kinda like that Magic Drift bottom lip. But I don't see if for F10 on their site..

[lsturbointeg]

Originally Posted by Black5

I kinda like that Magic Drift bottom lip. But I don't see if for F10 on their site..

Its universal

[LACSTER]

That's going to look sweet!

The non msport needs to this lip to complete it. I wasn't aware the Schmiedmann sold aftermarket parts.

Let's see some installed pics for fitment sake.

[lsturbointeg]

Originally Posted by LACSTER

That's going to look sweet!

The non msport needs to this lip to complete it. I wasn't aware the Schmiedmann sold aftermarket parts.

Let's see some installed pics for fitment sake.

Definitely! first time i saw your car back in the day you were i think the first one to sport the 3D on your non m and than i think you molded it into the bumper. that's when i knew i wanted the same thing but in carbon fiber. i'll post pictures here shortly.

[slownfast]

Originally Posted by lsturbointeg

Definitely! first time i saw your car back in the day you were i think the first one to sport the 3D on your non m and than i think you molded it into the bumper. that's when i knew i wanted the same thing but in carbon fiber. i'll post pictures here shortly.

yes, please upload the picture. curious how it looks in carbon fibre

[lsturbointeg]

Originally Posted by slownfast

yes, please upload the picture. curious how it looks in carbon fibre

slownfast, i posted a few post above. it has the black polyurethane splitter on it as well. i'll be installing it tomorrow if it doesn't rain and i'll post pictures once it's on the car. from my mock-up it looks pretty damn sick! i thought about going carbon fiber splitter but it probably would have been too much carbon fiber

[slownfast]

Originally Posted by lsturbointeg

slownfast, i posted a few post above. it has the black polyurethane splitter on it as well. i'll be installing it tomorrow if it doesn't rain and i'll post pictures once it's on the car. from my mock-up it looks pretty damn sick! i thought about going carbon fiber splitter but it probably would have been too much carbon fiber

I know, I mean when you install it on the car. does the splitter have the same length? it looks nice tho.

[Jet in Oz]

Originally Posted by lsturbointeg

I thought about going carbon fiber splitter but it probably would have been too much carbon fiber

Totes agree Plus you could end up with a different weave if they are coming from two different suppliers.

[lsturbointeg]

Originally Posted by Jet in Oz

Totes agree Plus you could end up with a different weave if they are coming from two different suppliers.

Exactly! It would probably look retarded if the weaves didn't match or flow in the right direction

[lsturbointeg]

Originally Posted by slownfast

I know, I mean when you install it on the car. does the splitter have the same length? it looks nice tho.

Oh I see what u mean now. It lines up evenly and does not extend to the left or right of the lip. I've seen some where its 1-2" longer than the spoiler itself so the one I picked up looks pretty good. Simple3 did the same thing and that's where I got the idea. His came out pretty sick!
http://f10.5post.com/forums/attachme...1&d=1444768186
http://f10.5post.com/forums/attachme...1&d=1444768186

[lsturbointeg]

Taking the bumper off cause it seems to be easier to put on

[exia_m3]

pics OMG might just order that 3D lip

[lsturbointeg]

Originally Posted by xenoz535

pics OMG might just order that 3D lip

From Schmeidmann?

[lsturbointeg]

Okay, so here's the 3d spoiler installed without the splitter. Fitment I think was 95% as I had to trim a piece I think they forgot to cut...no biggie! Because there's not a whole lot of flexibility I had to be careful fitting this on.

[lsturbointeg]

Here it is with the polyurethane splitter





It started to rain outside so I'll have to wait to put the bumper back on tomorrow

[exia_m3]

hows the fitment? whats making its 95% and not the 100?

[Jet in Oz]

Originally Posted by lsturbointeg

It started to rain outside so I'll have to wait to put the bumper back on tomorrow

That shouldn't stop you ... you bring your F10 into the loungeroom of a night, right? Day time should be no different

[lsturbointeg]

Originally Posted by Jet in Oz

That shouldn't stop you ... you bring your F10 into the loungeroom of a night, right? Day time should be no different

Lol...u got a point!

[lsturbointeg]

Originally Posted by xenoz535

hows the fitment? whats making its 95% and not the 100?

where I circled on both sides I had to cut the tabs that were going down...small square piece. U can see the white marks... imma use a black sharpie to cover it up. I think they forgot to cut it off?