[Breach]

I'm going to replace my 9x Ah battery with a 105 Ah one (likely Varta H15). I found SI B61 30 14 which says I'll need an extra clamp: "Important note: F06, F07, F10, F12, and F13 vehicles will require an additional hold-down clamp (P/N 61 21 7 592 923), only if upgrading from a 90 Ah battery to a 105 Ah battery."

Has anyone done this? Any tips on the installation of this extra clamp? Want to make sure I do things properly.

No problem to change capacity and register in ISTA/D afterwards. Thanks.