|
|
|
2010 2011 BMW 5 Series Forum F10 Comfort access-Trunk opening function |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-13-2015, 07:15 PM | #1 |
Lieutenant
33
Rep 474
Posts |
Comfort access-Trunk opening function
Guys. Question. So i went to the shop to do my M sport conversion for my rear bumper. During the installation, we made a mistake a scratch the paint, so they will repaint it and re-install next week. Well, that is not the question but due to that reason, we put back the OEM non-sport back on. Then the function of moving the feet underneath the car to open the trunk doesn't work anymore. Any of you know anything about that? Or i suppose to re-set some kinda of software from the idrive to have it working again?
|
06-13-2015, 09:31 PM | #2 |
Private
18
Rep 77
Posts |
Most likely the sensor is either not connected or poorly connection after reassembly. Worst case, wire harness is pinched and requires repair. There is no reset. It's either working or not.
__________________
2013, 535 XDrive, 112k miles
1997, 328is, 335k miles - Retired 1998, ML320, 200k miles - Sold 2018, Q5, 100 miles 2005, XC70 AWD, 160k miles |
Appreciate
0
|
06-13-2015, 09:40 PM | #3 |
Lieutenant
33
Rep 474
Posts |
Oh i see. Thank you. Maybe we just forgot to connect. Well, i'll check on that next week when we re-install it. Thanks
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|