[95blkmax]

BIMMERPOST / Classifieds

Asking Price:

Sold

Shipping Costs Included

Item Interest

**Will ship FedEx ground only within 48-state continental USA**

These are front calipers off a 2011 BMW X6M. Made by Brembo for BMW, these are black 4-pot massive calipers that look sexay AF. They had 91k miles on them when the car got totaled. I got them with basically brand new brake pads, hardware was all good, and calipers seem to be in great shape (no signs of leaks).

Only thing I see with them is they could use a re-paint. I was going to do it myself, but A- I don't have the time, and B- I didn't want to make more work for the next person in case they don't like the color I pick. I did have issue getting one of the pins out (see pic) and I ended up scratching the crap out of the paint with my tool skipping. But no damage to the casting itself. This would be taken care of with the re-paint anyway.

You are responsible for fitment, but I suggest you read through Darkkn1ght's thread here to see all you need. But from what I've seen...
- calipers bolt right up to our F10s
- will need 4mm SS spacers between the hub and caliper for them to sit centered on the X6M rotors (that sit further outward)
- X6M front rotors
- depending on your wheel design/ offset, you may need spacers for the back of the spokes to clear the caliper face.

I BELIEVE 20s are needed to clear. But I hope to do a test fit try this weekend to see IF they'll clear my 19" 351Ms. Will update then.

[musclesmarinara75]

Damn.. those are gigantic.. been wanting bigger calipers..but I got 18's on mine still and if I didn't have so much going on I would buy...glws

[95blkmax]

UPDATE- sale pending. Agreement made and holding until Friday of next week for buyer. I will update again by EoD on Friday