Rear bumper guard

sqeezed · 08-10-2016, 02:15 PM

Hi Guys,

Any one purchased a sticker to protect the rear bumper. my baby stroller scratch my car so bad and it's getting worth because it's too big.

I have look everywhere but I couldn't find for the F10 535 M Tech Bumper. or for BMW F10 in general.

if you know any trick please share it with me that will be great.

Thanks.

sqeezed · 08-11-2016, 11:30 AM

ANY IDEA

VB5ER · 08-11-2016, 11:39 AM

Vinyl wrap with color match. Cardboard template cut vinyl to template. Done. Flat surface like that you can use a thicker than average vinyl for a little more protection.

ndinh · 08-11-2016, 12:01 PM

Here ya go. There's a nice chrome one but you'd probably want to vinyl wrap it after install and there's a rubber one:

http://www.aliexpress.com/item/For-B...8-f53b6fbd5ffd

http://www.aliexpress.com/item/Car-t...8-f53b6fbd5ffd

I have the same problem with my F07 from baby stroller and luggage.

ezaircon4jc · 08-11-2016, 12:24 PM

Quote:

Originally Posted by ZennnZennn

ANY IDEA

I went to my tinter and he installed a clear film (IIRC, it's the clear-bra material) over the area. It also extends down the bumper a couple of inches to protect the edge. I should have touched-up the couple of dings first...

I tried to take a pic but the film doesn't show...

sqeezed · 08-11-2016, 02:27 PM

Thanks a lot VB5ER ndinh ezaircon4jc these are really helpful ideas.

paul223 · 08-12-2016, 06:49 AM

Why can't you lift properly and carefully? Just curious.

sqeezed · 08-12-2016, 11:45 AM

Quote:

Originally Posted by paul223

Why can't you lift properly and carefully? Just curious.

I do

but my wife don't the stroller is heavy.

ezaircon4jc · 08-12-2016, 02:04 PM

Quote:

Originally Posted by paul223

Why can't you lift properly and carefully? Just curious.

'Cause wives aren't as careful...

paul223 · 08-12-2016, 03:11 PM

Quote:

Originally Posted by ZennnZennn

Quote:

Originally Posted by paul223

Why can't you lift properly and carefully? Just curious.

I do

but my wife don't the stroller is heavy.

Ahhh, Damn, I know them crazy wives.

SchillerM · 08-13-2016, 09:40 PM

OP, is that part different between base an M bumper? Looks to be similar..
I can measure my base one and compare if you want.

https://www.partsvilleauto.com/wp-co...09682969-3.jpg
https://www.partsvilleauto.com/wp-co...59479536-2.jpg
Matt

lsturbointeg · 08-16-2016, 03:33 PM

i saw something awhile back but it's a rubber piece that goes on top of the bumper instead of the vinyl sticker...i'll have to find it

Jayphil · 08-16-2016, 08:04 PM

There is an OEM BMW Equipment for that purpose:

https://www.x-ph.com/genuine-bmw-f10...load-edge-mat/

lsturbointeg · 08-17-2016, 09:17 PM

Quote:

Originally Posted by Jayphil

There is an OEM BMW Equipment for that purpose:

https://www.x-ph.com/genuine-bmw-f10...load-edge-mat/

there's another product i found somewhere browsing the internet and it's a rubber piece that's stuck just on the top of that rear bumper...i'm still looking

edit: i found it!

http://www.ebay.com/itm/Bumper-Prote...lXQnz5&vxp=mtr

or this!
http://www.ebay.com/itm/Carbon-fiber...9Wg1S3&vxp=mtr

ezaircon4jc · 08-17-2016, 11:10 PM

Quote:

Originally Posted by lsturbointeg

there's another product i found somewhere browsing the internet and it's a rubber piece that's stuck just on the top of that rear bumper...i'm still looking

edit: i found it!

http://www.ebay.com/itm/Bumper-Prote...lXQnz5&vxp=mtr

or this!
http://www.ebay.com/itm/Carbon-fiber...9Wg1S3&vxp=mtr

IMHO those things look too minivanish...

lsturbointeg · 08-18-2016, 07:13 AM

Quote:

Originally Posted by ezaircon4jc

IMHO those things look too minivanish...

Yeah but being his car is black it won't be noticeable. Plus that part of the bumper i had scratches on mine from my kids not lifting grocery bags out of the trunk rather dragging them across so I can see how this can be helpful

08-10-2016, 02:15 PM	#1
sqeezed First Lieutenant 100 Rep 330 Posts Drives: BMW 2014 M5 Join Date: Mar 2016 Location: SF \| Bay Area iTrader: (0)	Rear bumper guard Hi Guys, Any one purchased a sticker to protect the rear bumper. my baby stroller scratch my car so bad and it's getting worth because it's too big. I have look everywhere but I couldn't find for the F10 535 M Tech Bumper. or for BMW F10 in general. if you know any trick please share it with me that will be great. Thanks. Attached Images
	Appreciate 0 Tweet Quote

08-11-2016, 11:30 AM	#2
sqeezed First Lieutenant 100 Rep 330 Posts Drives: BMW 2014 M5 Join Date: Mar 2016 Location: SF \| Bay Area iTrader: (0)	ANY IDEA
	Appreciate 0 Quote

08-11-2016, 11:39 AM	#3
VB5ER Second Lieutenant 175 Rep 257 Posts Drives: Space Grey 2011 535i Join Date: Jun 2015 Location: United States iTrader: (0)	Vinyl wrap with color match. Cardboard template cut vinyl to template. Done. Flat surface like that you can use a thicker than average vinyl for a little more protection.
	Appreciate 1 sqeezed99.50 Quote

08-11-2016, 12:01 PM	#4
ndinh Lieutenant 161 Rep 554 Posts Drives: 640i GC, X5 Join Date: Jul 2015 Location: Los Angeles iTrader: (2)	Here ya go. There's a nice chrome one but you'd probably want to vinyl wrap it after install and there's a rubber one: http://www.aliexpress.com/item/For-B...8-f53b6fbd5ffd http://www.aliexpress.com/item/Car-t...8-f53b6fbd5ffd I have the same problem with my F07 from baby stroller and luggage.
	Appreciate 1 sqeezed99.50 Quote

08-11-2016, 02:27 PM	#6
sqeezed First Lieutenant 100 Rep 330 Posts Drives: BMW 2014 M5 Join Date: Mar 2016 Location: SF \| Bay Area iTrader: (0)	Thanks a lot VB5ER ndinh ezaircon4jc these are really helpful ideas.
	Appreciate 0 Quote

08-12-2016, 06:49 AM	#7
paul223 Major 411 Rep 1,126 Posts Drives: F10 Join Date: Dec 2013 Location: arkansas iTrader: (0)	Why can't you lift properly and carefully? Just curious.
	Appreciate 0 Quote

08-13-2016, 09:40 PM	#11
SchillerM First Lieutenant 90 Rep 333 Posts Drives: 11' 550i, '00 M5, '11 E90 335i Join Date: Apr 2014 Location: Vancouver, WA iTrader: (0)	OP, is that part different between base an M bumper? Looks to be similar.. I can measure my base one and compare if you want. https://www.partsvilleauto.com/wp-co...09682969-3.jpg https://www.partsvilleauto.com/wp-co...59479536-2.jpg Matt
	Appreciate 0 Quote

08-16-2016, 03:33 PM	#12
lsturbointeg Lieutenant General 9151 Rep 14,522 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	i saw something awhile back but it's a rubber piece that goes on top of the bumper instead of the vinyl sticker...i'll have to find it __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

08-16-2016, 08:04 PM	#13
Jayphil Private First Class 63 Rep 176 Posts Drives: 535I xdrive 2011 (M-SPORT) Join Date: Nov 2014 Location: Canada iTrader: (0)	There is an OEM BMW Equipment for that purpose: https://www.x-ph.com/genuine-bmw-f10...load-edge-mat/ __________________ BMW 535I xdrive 2011 M-Sport with H&R Springs, Niche Form Wheels 8.5 ET35 / 10.5 ET35, Continental DSW06 245/35 & 285/30, JB4 Map 5, ER Downpipe, Megan Racing Quad Exhaust with Vibrant resonators, M5 Diffuser, Orange reflector shaved and removed xdrive badge.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search