[alpachinsky]

Hi, guys.

I bought a crashed 535i F10 LCI (D483774) from IAAI few months ago. Everything is good except a problem with coolant system hose.
The problem is that I have no idea how to connect hose to radiator without a latch at the end to radiator, only clamp.
Here is photo explaining the problem:


This hose was in the car when it has come so its original 100% but there was no aux radiator, so I bought a new one. Here is photo:


When the radiator had come I couldn’t manage how to connect hose to the aux radiator without a latch and thought maybe the hose is damaged so bought a new one too, because on the diagram looks like it has latches on the both sides.
Hose number 14, 17128614879 http://www.realoem.com/bmw/enUS/show...diagId=17_0899
And I was wrong. Here is how new hose is look like: https://www.ecstuning.com/b-genuine-...e/17128614879/
The end on the heat exchange side goes with latch, but to radiator with simple clamp.

So here is the question: what am I doing wrong or how to connect 17128614879 to aux radiator? Because it 100% should be connected like this: