Car's too low to get exhaust done!

lsturbointeg · 05-06-2016, 09:37 PM

Thanks Teddy!

Yes, I will have the Mtech bumper put on prior to the exhaust so like you said they can line up the exhaust tips correctly. This weekend I'm planning on checking out a few exhaust places. But, I still need to order the Mtech side skirts so my buddy can paint the bumper, skirts and roof spoiler all at the same time. Probably around mid summer as I have a couple of vacation trips coming up and the wife asked if I could stop buying $hit for the car until afterwards lol

///Msport · 05-13-2016, 07:18 AM

Dude, my exhaust touches on the way down the ramp in my work garage. I'm not even dropped yet. Any of you dropped dudes have any issues like that with your exhaust?

Quicksilv3r · 05-13-2016, 08:49 AM

Just a thought, but many Mercedes dealers have drive-in alignment pits. I'm sure they could accommodate the install for a price.

lsturbointeg · 05-13-2016, 01:54 PM

Quote:

Originally Posted by ///Msport

Dude, my exhaust touches on the way down the ramp in my work garage. I'm not even dropped yet. Any of you dropped dudes have any issues like that with your exhaust?

Post a picture! Your exhaust is probably not installed right? no way you should be scrapping at stock height? What exhaust do you have?

Alpinapower · 05-13-2016, 02:31 PM

I have 4 of this ones:http://www.fritz-berger.de/product/A...&partnerid=34H

2,35 inch Art the Front Splitter and side skirts has 2,30 inch.
Iam using a 1inch Wood and so i Drive on the ramps.

There is a guy in West Michigan: http://forums.pelicanparts.com/members/8263.html
A friend of Mine was there.

lsturbointeg · 05-13-2016, 02:44 PM

Your $hits pretty damn low like mine! I did find a shop that can do the install. Love the whole black you got goin there!

really gotta upgrade from single to double slat grills

Alpinapower · 05-13-2016, 02:53 PM

Thanks man! Here is a pic after lowering with 20".
http://f10.5post.com/forums/showthre...1099014&page=2

lsturbointeg · 05-13-2016, 02:58 PM

Quote:

Originally Posted by Alpinapower

Thanks man! Here is a pic after lowering with 20".
http://f10.5post.com/forums/showthre...1099014&page=2

Yup...just replied in there

Alpinapower · 05-13-2016, 03:08 PM

Quote:

Originally Posted by lsturbointeg

Yup...just replied in there

I think you can go lower with your Front. M Front ist depper

Bmw doubles · 05-13-2016, 03:44 PM

Quote:

Originally Posted by Alpinapower

I have 4 of this ones:http://www.fritz-berger.de/product/A...&partnerid=34H

2,35 inch Art the Front Splitter and side skirts has 2,30 inch.
Iam using a 1inch Wood and so i Drive on the ramps.

There is a guy in West Michigan: http://forums.pelicanparts.com/members/8263.html
A friend of Mine was there.

Nice eyelids

///Msport · 05-16-2016, 12:10 PM

Quote:

Originally Posted by lsturbointeg

Post a picture! Your exhaust is probably not installed right? no way you should be scrapping at stock height? What exhaust do you have?

I have a 550i. Put the LSD Motorsports Steigen exhaust. I have to remember to take a pic. The muffler in the middle is hanging low.

lsturbointeg · 05-16-2016, 12:25 PM

Quote:

Originally Posted by ///Msport

I have a 550i. Put the LSD Motorsports Steigen exhaust. I have to remember to take a pic. The muffler in the middle is hanging low.

take a picture if you could. there's another member who just got the Armytrix exhaust and it's sitting pretty low from the diffuser too! not sure what's going on lately

Bmw doubles · 05-16-2016, 03:41 PM

That's how ya do it

lsturbointeg · 05-16-2016, 06:09 PM

^^^^^^^^^^^^^

There you go! I guess people here in my hillbilly town aren't that creative but they sure know how to get creative when running 24" dual exhaust pointing straight up from the bed of the Dodge trucks cause they think they're driving semis

05-06-2016, 09:37 PM	#23
lsturbointeg Lieutenant General 9151 Rep 14,522 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	Thanks Teddy! Yes, I will have the Mtech bumper put on prior to the exhaust so like you said they can line up the exhaust tips correctly. This weekend I'm planning on checking out a few exhaust places. But, I still need to order the Mtech side skirts so my buddy can paint the bumper, skirts and roof spoiler all at the same time. Probably around mid summer as I have a couple of vacation trips coming up and the wife asked if I could stop buying $hit for the car until afterwards lol __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

05-13-2016, 07:18 AM	#24
///Msport Private 6 Rep 81 Posts Drives: 2011 550i M-Sport Join Date: Dec 2014 Location: New York iTrader: (0)	Dude, my exhaust touches on the way down the ramp in my work garage. I'm not even dropped yet. Any of you dropped dudes have any issues like that with your exhaust?
	Appreciate 0 Quote

05-13-2016, 08:49 AM	#25
Quicksilv3r Captain 233 Rep 878 Posts Drives: 2013 BMW 535i M-Sport Join Date: Jun 2014 Location: Augusta, Georgia iTrader: (1)	Just a thought, but many Mercedes dealers have drive-in alignment pits. I'm sure they could accommodate the install for a price. __________________ -WJV
	Appreciate 2 Quote

05-13-2016, 02:31 PM	#27
Alpinapower Private 11 Rep 50 Posts Drives: BMW 535d Join Date: Mar 2015 Location: Deepest Bavaria iTrader: (0)	I have 4 of this ones:http://www.fritz-berger.de/product/A...&partnerid=34H 2,35 inch Art the Front Splitter and side skirts has 2,30 inch. Iam using a 1inch Wood and so i Drive on the ramps. There is a guy in West Michigan: http://forums.pelicanparts.com/members/8263.html A friend of Mine was there. Attached Images Last edited by Alpinapower; 05-13-2016 at 02:41 PM..
	Appreciate 0 Quote

05-13-2016, 02:44 PM	#28
lsturbointeg Lieutenant General 9151 Rep 14,522 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	Your $hits pretty damn low like mine! I did find a shop that can do the install. Love the whole black you got goin there! really gotta upgrade from single to double slat grills __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

05-13-2016, 02:53 PM	#29
Alpinapower Private 11 Rep 50 Posts Drives: BMW 535d Join Date: Mar 2015 Location: Deepest Bavaria iTrader: (0)	Thanks man! Here is a pic after lowering with 20". http://f10.5post.com/forums/showthre...1099014&page=2
	Appreciate 0 Quote

05-16-2016, 03:41 PM	#35
Bmw doubles Dream crusher 983 Rep 2,421 Posts Drives: Fast Join Date: Mar 2015 Location: westside iTrader: (0) Garage List 2011 535 [0.00]	That's how ya do it Attached Images __________________ 535i MIssion Performance, PS2, Helix HPFP Kit, Wagner FMIC, Spec 3 clutch, Steel SMF, Wolf Racing CP, UUC SSK, GFB dv, SprintBooster, Custom Dynomax Exhaust, M5 Sways, Eibach OE Springs, Koni Sports Adjustable, Custom Short Ram CAI IG: @bmwdoubles
	Appreciate 0 Quote

05-16-2016, 06:09 PM	#36
lsturbointeg Lieutenant General 9151 Rep 14,522 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	^^^^^^^^^^^^^ There you go! I guess people here in my hillbilly town aren't that creative but they sure know how to get creative when running 24" dual exhaust pointing straight up from the bed of the Dodge trucks cause they think they're driving semis __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search