Sweet! finally picked up a DA polisher!

lsturbointeg · 07-01-2016, 11:08 PM

nothing special but couldn't pass up a good deal for 4th of July special at Harbor Freight! anyways, besides the Meguiar's 205 and 105 anyone have any recommendations on other products running about the same price as the meguiar's?

DDD31 · 07-02-2016, 09:15 AM

Nice!

Buying a DA polisher was probably the most influential item I've bought when it pertains to car detailing. Machine polishing a car is much easier than by hand and you're able to get much better results especially in removing scratches and swirls.

I highly recommend Menzerna polishes. They're a little pricey but give tremendous results.

Have fun!

lsturbointeg · 07-02-2016, 04:46 PM

Quote:

Originally Posted by DDD31

Nice!

Buying a DA polisher was probably the most influential item I've bought when it pertains to car detailing. Machine polishing a car is much easier than by hand and you're able to get much better results especially in removing scratches and swirls.

I highly recommend Menzerna polishes. They're a little pricey but give tremendous results.

Have fun!

Totally agree with you on the DA polisher. Gonna do some more research on polishing compounds. I've watched Junkman's and now watching Chemical Guy's YouTube videos.

dadysev · 07-04-2016, 08:00 AM

Both are really good products. check this write up...

http://www.autopia.org/forums/detail...-compound.html

Just a note, you are going to be reading and get confused with all these products!! lol. drove me nuts over the past 4 months. But the Junkmans vids really helped.

I'm still sticking to 10% products and 90% technics/elbow grease !

I went with the Meg's 105/205 and Orange and White Hex logic pads. I'm extremely happy with the results for a novice. I'm getting random complements even when the car is dirty!

lsturbointeg · 07-04-2016, 05:37 PM

Quote:

Originally Posted by dadysev

Both are really good products. check this write up...

http://www.autopia.org/forums/detail...-compound.html

Just a note, you are going to be reading and get confused with all these products!! lol. drove me nuts over the past 4 months. But the Junkmans vids really helped.

I'm still sticking to 10% products and 90% technics/elbow grease !

I went with the Meg's 105/205 and Orange and White Hex logic pads. I'm extremely happy with the results for a novice. I'm getting random complements even when the car is dirty!

After watching Chemical Guys YouTube last night I think I'll give their V34 compound, V36 medium and V38 finishing and Butterwax Carnuba to seal it. Maybe Jet? Also ordering their HexLogic pads orange, white and blue pad. With their discounts and sales I think I'll save that way instead of going Meguiar's 105/205.

That link to autopia was cool. Meguiar's looks to be a very good product to use.

Quicksilv3r · 07-17-2016, 01:03 PM

Some 'after' and one 'before' shot of my weekend doing a single stage polish on the 5. Took about 20 hours to do entire car. Worth it!

Adam's Pro Clay Bar
Porter Cable 7424xp polisher
Pinnacle Advance Swirl Remover
Optimum Spray Wax

I used a black finishing pad and Pinnacle Finisher on the hood but honestly didnt notice much difference between that and how the rest of the car looked with just the swirl remover, so i only 'finished' the hood. I'd be another 6hrs into it if i decided to used finishing pad on the entire car.

MavRick · 07-21-2016, 07:16 PM

Quote:

Originally Posted by lsturbointeg

nothing special but couldn't pass up a good deal for 4th of July special at Harbor Freight! anyways, besides the Meguiar's 205 and 105 anyone have any recommendations on other products running about the same price as the meguiar's?

i've got the same DA. it works pretty damn well. i'm picking up a Carbon Black 550i, this weekend, and its going to need a LOT of work. luckily....i've had a good bit of practice.

My old ISF...

this time...i'll seal it with some CQuartz. i'll make sure to start a thread when i finish. congrats on the pick up.

oh...@Quicksilv3r, fantastic job on the car!!!!

sqeezed · 07-23-2016, 11:44 PM

Quote:

Originally Posted by lsturbointeg

After watching Chemical Guys YouTube last night I think I'll give their V34 compound, V36 medium and V38 finishing and Butterwax Carnuba to seal it. Maybe Jet? Also ordering their HexLogic pads orange, white and blue pad. With their discounts and sales I think I'll save that way instead of going Meguiar's 105/205.

That link to autopia was cool. Meguiar's looks to be a very good product to use.

Hey, I'm planing to get polishing Machine and compounds, I have watched the Junkman but you got me distracted. Have you tried these guys u got yet?

What is the total cost will be if I decided to get the machine and do it by my self?

lsturbointeg · 07-24-2016, 12:31 AM

Quote:

Originally Posted by ZennnZennn

Hey, I'm planing to get polishing Machine and compounds, I have watched the Junkman but you got me distracted. Have you tried these guys u got yet?

What is the total cost will be if I decided to get the machine and do it by my self?

I'm planning on doing this on my 4 days off. It's going to take a few days to do this right. So for the time being I just been ordering my products. From products, tools and even stools and carts lol! I'm starting off with the Harbor Freight DA for now and eventually upgrade to a different in case I don't like the HF? Total cost as in the DA or do you mean everything? So far $400+

Here's my other thread I posted:
http://f10.5post.com/forums/showthread.php?t=1283454

Simple5 · 07-25-2016, 09:05 AM

http://www.autopia.org/forums/polish...weak-mods.html

Did this to my HF polisher. Works way better with these mods!

NV GUNS · 08-23-2016, 01:36 AM

Quote:

Originally Posted by lsturbointeg

I'm planning on doing this on my 4 days off. It's going to take a few days to do this right. So for the time being I just been ordering my products. From products, tools and even stools and carts lol! I'm starting off with the Harbor Freight DA for now and eventually upgrade to a different in case I don't like the HF? Total cost as in the DA or do you mean everything? So far $400+

Here's my other thread I posted:
http://f10.5post.com/forums/showthread.php?t=1283454

Dude this is what you need http://www.zymol.com/vintage.aspx Unlimited refills for life it will save you cash in the long run. I am thinking about getting it.

lsturbointeg · 08-23-2016, 09:04 AM

Quote:

Originally Posted by NV GUNS

Dude this is what you need http://www.zymol.com/vintage.aspx Unlimited refills for life it will save you cash in the long run. I am thinking about getting it.

$2500! What is it? Glaze?

dencoupe · 08-23-2016, 02:36 PM

sorry for my bad english ... being dutch isn't helping

The paint of our bmw is very hard, i've had nice results with the DAP900v3 using Scholl concept polish

lsturbointeg · 08-23-2016, 03:05 PM

Quote:

Originally Posted by dencoupe

sorry for my bad english ... being dutch isn't helping

The paint of our bmw is very hard, i've had nice results with the DAP900v3 using Scholl concept polish

Awesome to hear

so hopefully I won't have to worry about doing this again I'm watching what I use on the car now lol! The CG's waterless car wash is doing great!

Silent_308 · 08-23-2016, 03:37 PM

Good congrats!! I live and die by 3M machine polish, compound, and Meguiars Gold Class. P21S, is my next choice, but waxing is all about the foundation and work you put in on the clear coat. I've detailed, polished, and waxed almost 200 cars ranging from Fararri to Ford Escort.. What I've learned is that different waxes and compounds take differently on types of paint. However, back when I used to try all those expensive over the top waxes thinking that price equated to better; I learned that was far from true.
Use the proper tools when the proper tool is supposed to be used.. ie you need to clean the clear; wash, clay, compound, polish, wax. Don't try to wax out scratches or swirl marks..

I use only 3M pads for my machine products, and only Meguiars Gold or P21S. I typically only have to wax maybe once per year, and use detail spray to clean off dust, but my cars stay in the garage most everywhere I go..Heavy pollen I rinse off with water.

NV GUNS · 08-23-2016, 03:49 PM

Quote:

Originally Posted by lsturbointeg

$2500! What is it? Glaze?

looks like glaze, but unlimited refills for life, looks like something to split among
friends. http://www.zymol.com/royale.aspx this one is crazy

SchillerM · 09-08-2016, 10:14 AM

Quote:

Originally Posted by NV GUNS

looks like glaze, but unlimited refills for life, looks like something to split among
friends. http://www.zymol.com/royale.aspx this one is crazy

"Among the protective ingredients in Vintage are evergreen, honeydew, coconut, cantaloupe, and sunflower oils."

Wonder what it tastes like...

What does it take to refill? Send it in and pay postage both ways?

This one is only $55k, http://www.zymol.com/solaris.aspx

NV GUNS · 09-08-2016, 08:14 PM

Quote:

Originally Posted by SchillerM

Quote:

Originally Posted by NV GUNS

looks like glaze, but unlimited refills for life, looks like something to split among
friends. http://www.zymol.com/royale.aspx this one is crazy

"Among the protective ingredients in Vintage are evergreen, honeydew, coconut, cantaloupe, and sunflower oils."

Wonder what it tastes like...

What does it take to refill? Send it in and pay postage both ways?

This one is only $55k, http://www.zymol.com/solaris.aspx

tastes like victory and accomplishment. but for free refills I am sure they will refill a couple times a year

PJinCA · 09-12-2016, 03:02 PM

Quote:

Originally Posted by NV GUNS

Dude this is what you need http://www.zymol.com/vintage.aspx Unlimited refills for life it will save you cash in the long run. I am thinking about getting it.

GEEZ!!!!! $2500?!?!?!?! I get it if you're protecting the sheen on a $1m show car, but on a car that is a daily driver? THat is beyond ludicrous. For that price they shouldn't just include "lifetime refills" it should include BJs on demand as well.

NV GUNS · 09-12-2016, 08:52 PM

Quote:

Originally Posted by PJinCA

Quote:

Originally Posted by NV GUNS

Dude this is what you need http://www.zymol.com/vintage.aspx Unlimited refills for life it will save you cash in the long run. I am thinking about getting it.

GEEZ!!!!! $2500?!?!?!?! I get it if you're protecting the sheen on a $1m show car, but on a car that is a daily driver? THat is beyond ludicrous. For that price they shouldn't just include "lifetime refills" it should include BJs on demand as well.

yeah that what think also but that is not even there high end glaze they have one for 9 grand of course life time refills

DDD31 · 09-13-2016, 08:45 AM

Quote:

Originally Posted by PJinCA

GEEZ!!!!! $2500?!?!?!?! I get it if you're protecting the sheen on a $1m show car, but on a car that is a daily driver? THat is beyond ludicrous. For that price they shouldn't just include "lifetime refills" it should include BJs on demand as well.

Not only should BJs be on demand but said BJer should apply the wax and remove it using her silk panties.

lsturbointeg · 09-13-2016, 11:49 PM

Quote:

Originally Posted by DDD31

Not only should BJs be on demand but said BJer should apply the wax and remove it using her silk panties.

I'm content with my Black light and it only cost me $25 bucks lol! Kinda glad I didn't spend crazy money on a DA as it's pretty much a one time use as now it just sits in my tool box starting to gather dust

07-01-2016, 11:08 PM	#1
lsturbointeg Lieutenant General 9151 Rep 14,522 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	Sweet! finally picked up a DA polisher! nothing special but couldn't pass up a good deal for 4th of July special at Harbor Freight! anyways, besides the Meguiar's 205 and 105 anyone have any recommendations on other products running about the same price as the meguiar's? __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 Tweet Quote

07-02-2016, 09:15 AM	#2
DDD31 Captain 1649 Rep 891 Posts Drives: 24 M3CS, 95 E320, 85 300CD Join Date: Jul 2015 Location: Michigan iTrader: (0)	Nice! Buying a DA polisher was probably the most influential item I've bought when it pertains to car detailing. Machine polishing a car is much easier than by hand and you're able to get much better results especially in removing scratches and swirls. I highly recommend Menzerna polishes. They're a little pricey but give tremendous results. Have fun! __________________ 2021 MBB M5C (retired) 2018 Daytona Violet M3 ZCP (retired), 2016 AW 550i (retired) 2013 EBII 335i (retired), 2008 Platinum Bronze 535xi (retired), 2007 Monaco Blue 335i (retired) 1999 Hellrot M3 coupe (retired)
	Appreciate 1 Quote

07-04-2016, 08:00 AM	#4
dadysev Captain 169 Rep 687 Posts Drives: Man Join Date: Jul 2013 Location: Toronto, Canada iTrader: (0)	Both are really good products. check this write up... http://www.autopia.org/forums/detail...-compound.html Just a note, you are going to be reading and get confused with all these products!! lol. drove me nuts over the past 4 months. But the Junkmans vids really helped. I'm still sticking to 10% products and 90% technics/elbow grease ! I went with the Meg's 105/205 and Orange and White Hex logic pads. I'm extremely happy with the results for a novice. I'm getting random complements even when the car is dirty!
	Appreciate 1 Quote

07-17-2016, 01:03 PM	#6
Quicksilv3r Captain 234 Rep 878 Posts Drives: 2013 BMW 535i M-Sport Join Date: Jun 2014 Location: Augusta, Georgia iTrader: (1)	Some 'after' and one 'before' shot of my weekend doing a single stage polish on the 5. Took about 20 hours to do entire car. Worth it! Adam's Pro Clay Bar Porter Cable 7424xp polisher Pinnacle Advance Swirl Remover Optimum Spray Wax I used a black finishing pad and Pinnacle Finisher on the hood but honestly didnt notice much difference between that and how the rest of the car looked with just the swirl remover, so i only 'finished' the hood. I'd be another 6hrs into it if i decided to used finishing pad on the entire car. Attached Images __________________ -WJV
	Appreciate 0 Quote

07-25-2016, 09:05 AM	#10
Simple5 Major 347 Rep 1,397 Posts Drives: 2013 M5 Join Date: Jul 2011 Location: USA iTrader: (8)	http://www.autopia.org/forums/polish...weak-mods.html Did this to my HF polisher. Works way better with these mods!
	Appreciate 0 Quote

08-23-2016, 02:36 PM	#13
dencoupe Registered 0 Rep 4 Posts Drives: 520D touring Join Date: Aug 2016 Location: Netherlands (Oss) iTrader: (0)	sorry for my bad english ... being dutch isn't helping The paint of our bmw is very hard, i've had nice results with the DAP900v3 using Scholl concept polish
	Appreciate 0 Quote

08-23-2016, 03:37 PM	#15
Silent_308 Knees in the Breeze 6 Rep 22 Posts Drives: 2011 F10 Join Date: Oct 2012 Location: MD iTrader: (0)	Good congrats!! I live and die by 3M machine polish, compound, and Meguiars Gold Class. P21S, is my next choice, but waxing is all about the foundation and work you put in on the clear coat. I've detailed, polished, and waxed almost 200 cars ranging from Fararri to Ford Escort.. What I've learned is that different waxes and compounds take differently on types of paint. However, back when I used to try all those expensive over the top waxes thinking that price equated to better; I learned that was far from true. Use the proper tools when the proper tool is supposed to be used.. ie you need to clean the clear; wash, clay, compound, polish, wax. Don't try to wax out scratches or swirl marks.. I use only 3M pads for my machine products, and only Meguiars Gold or P21S. I typically only have to wax maybe once per year, and use detail spray to clean off dust, but my cars stay in the garage most everywhere I go..Heavy pollen I rinse off with water.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search