[gomble]

Hello,

i retrofited yesterday a TRSVC modul, camera wire from kufatec and the camera.

i coded it with esys:
FA edited and added 3AG then i coded it to HU_CIC,PDC.
The TRSVC had no CAFD, i added the newest cafd from the highest ilevel and coded the FA to TRSVC. (i doent selected the cafd which is on the ilevel from my car)

After that i pushed the PDC button and geht following screen:

https://www.dropbox.com/s/ytvuufall5...%2008.jpg?dl=0

A blue screen with an error "Camera Malfunction Warning"

I wanted to calibrate the camera with Rheingold ISTA, but i get there the warning that the calibration process cant start because the camera is not available.

Can you help? What did i wrong ?

I want to code today the FA on the Root of all ecus and check the wire from the camera and maybe the 12V wire, but i think, when the TRSVC modul has get recognized by esys the 12V wire must be okay.

sry for my english, i hope you can help

[gomble]

everything clear, it was the wire cable which was not pluged 100%