Dinan Wheels Xdrive Fitment

Jwis · 01-27-2020, 11:00 AM

I have come across a set of the Dinan cast wheels and am looking for some advice on fitment. The wheels are staggered with the following specs:

Front: 20x9 ET33
Rear: 20x10 ET47

Has anyone put the staggered set of these on an Xdrive F10 550? Dinan had marketed a square set, 20x9, for the xdrive at the time, but I am interested in this staggered set. Also, any advice on spacers given the offsets?

Tires would be 245/35/20, 285/30/20, which is slightly different than their recommendation. Any insight into these fitment issues, or experience with these wheels would be helpful

Thanks

John H. · 01-28-2020, 08:13 PM

I run those tire sizes on my xDrive. My rim widths are the same; however, ETs are a little different....FR ET 25, RR ET 40. If I am not mistaken, those Dinan wheel sets include spacers, not certain of thickness.

01-27-2020, 11:00 AM	#1
Jwis New Member 0 Rep 7 Posts Drives: 550i xdrive Join Date: Dec 2015 Location: ohio iTrader: (0)	Dinan Wheels Xdrive Fitment I have come across a set of the Dinan cast wheels and am looking for some advice on fitment. The wheels are staggered with the following specs: Front: 20x9 ET33 Rear: 20x10 ET47 Has anyone put the staggered set of these on an Xdrive F10 550? Dinan had marketed a square set, 20x9, for the xdrive at the time, but I am interested in this staggered set. Also, any advice on spacers given the offsets? Tires would be 245/35/20, 285/30/20, which is slightly different than their recommendation. Any insight into these fitment issues, or experience with these wheels would be helpful Thanks
	Appreciate 0 Tweet Quote

01-28-2020, 08:13 PM	#2
John H. Lieutenant 230 Rep 455 Posts Drives: 2014 535i XDrive Join Date: Jun 2017 Location: The O.C. iTrader: (5)	I run those tire sizes on my xDrive. My rim widths are the same; however, ETs are a little different....FR ET 25, RR ET 40. If I am not mistaken, those Dinan wheel sets include spacers, not certain of thickness. Last edited by John H.; 01-28-2020 at 08:14 PM.. Reason: Added info.
	Appreciate 0 Quote