F10 n63 Intake Interest

badblack550xi · 06-20-2016, 08:52 AM

Quote:

Originally Posted by BlackWidow

+1 on nasty filters. Really brings the quality of the car down when you peep in the grills on a sunny day and see brown. It's quite noticeable from a distance too.

Anyone find replacement filters? I seen the updated ones above, and I don't like how the air is now channeled through a smaller opening and its chrome again.

Almost any filter with a 3 inch opening will fit, if you don't like the chrome finish there are spectre filters that you can buy at any auto zone. They have smaller size and larger size both fit behind the grilles.

Bossman535 · 06-20-2016, 05:31 PM

Quote:

Originally Posted by VinoFiveFiddy

Quote:

Originally Posted by badblack550xi

Daaayuuuum!! They look good!

Where are those intake filters from ?

badblack550xi · 06-20-2016, 10:54 PM

Quote:

Originally Posted by Bossman535

Where are those intake filters from ?

N63intake.com

535_BiTurbo · 11-30-2017, 08:08 AM

Can I resuse these type of Spectre filters that I use to run on my N54 on my N63 or are they too large?
http://www.e90post.com/forums/showthread.php?t=712499

Taynice87 · 11-30-2017, 05:10 PM

Im interested very much can't wait till this is out

fsmontes · 11-30-2017, 10:31 PM

Quote:

Originally Posted by Taynice87

Im interested very much can't wait till this is out

Already being sold.

N63intake.com

Cali_G05 · 12-01-2017, 01:40 PM

Definitely interested in one count me in!

535_BiTurbo · 12-05-2017, 08:15 AM

Simple5 · 12-05-2017, 12:49 PM

Awesome work man. I'll be going to this setup once I put some more miles on my custom panel filters!

ReyNLyanne · 12-07-2017, 12:19 AM

Sorry new to forum maybe not on the right thread but do these fit f10 535i?

Simple5 · 12-07-2017, 06:40 AM

Quote:

Originally Posted by ReyNLyanne

Sorry new to forum maybe not on the right thread but do these fit f10 535i?

No, but try this:

http://f10.5post.com/forums/showthread.php?t=1315103

ReeferCheefer · 02-07-2018, 01:25 PM

Any one try these?

https://www.armmotorsports.com/BMW-F...n63-intake.htm

535_BiTurbo · 02-07-2018, 09:18 PM

Quote:

Originally Posted by ReeferCheefer

Any one try these?

https://www.armmotorsports.com/BMW-F...n63-intake.htm

Simple3 tried it

535_BiTurbo · 02-07-2018, 09:20 PM

there were issues with it popping codes

Simple5 · 02-08-2018, 12:51 PM

Quote:

Originally Posted by 535_BiTurbo

there were issues with it popping codes

They apparently found a fix for the codes and asked me if I wanted to give the intake another try. I didn't want to because I'll using my high flow panel filters and soon will be mating it with the flex tubing to the grills.

Give the intake a shot. They have a 30 day money back guarantee with free return shipping.

AmooManiak · 02-08-2018, 02:06 PM

Quote:

Originally Posted by Simple3

They apparently found a fix for the codes and asked me if I wanted to give the intake another try. I didn't want to because I'll using my high flow panel filters and soon will be mating it with the flex tubing to the grills.

Give the intake a shot. They have a 30 day money back guarantee with free return shipping.

How hard is the install? What about sound?

Simple5 · 02-09-2018, 07:10 PM

Quote:

Originally Posted by AmooManiak

How hard is the install? What about sound?

Our was easy. Sound was great! All you have to do is remove the air box! Give it a shot!

AmooManiak · 02-10-2018, 01:14 PM

How long do you think the install takes? Over an hour? Trying to get a rough estimate of what's involved. thanks!

Simple5 · 02-10-2018, 02:32 PM

Quote:

Originally Posted by AmooManiak

How long do you think the install takes? Over an hour? Trying to get a rough estimate of what's involved. thanks!

Takes about an hour with double checking everything.

535_BiTurbo · 02-10-2018, 02:54 PM

Quote:

Originally Posted by AmooManiak

How long do you think the install takes? Over an hour? Trying to get a rough estimate of what's involved. thanks!

Its fairly easy

535_BiTurbo · 02-12-2018, 07:00 PM

Does the N63intake setup produce similar vbox gains on the F10 550i as to those produced by MSR intakes on the F80 M4 and F10 M5?

"The Dyno has shown 20-40 WHP and torque between my stock M5 and on my fully modded M6 do to being more efficient, and my M6 had BMS filters charcoal filter delete RPI scoops befure intake. The Dyno doesn't show its true potential do to its unconventional design.
Everything has been tested from Vbox track and Dyno and proven gains not only on my personal cars but also customers cars as well. Two of my customers had Gruppe M and noticed a huge improvement immediately even before adapting.

Vbox gains have proven .5 seconds from 60-130 mph on my completely stock M5
Also track proven on a customers M5 knocked off .5 seconds off the 1/4 and gain 4-5 mph. My M6 world record 10.7 129mph befire intake 11.0 126-127mph These are real and proven tests not estimated guesses."

535_BiTurbo · 02-28-2018, 11:46 AM

Updated pics with new filers (Spectre 8132)

11-30-2017, 08:08 AM	#356
535_BiTurbo Captain 107 Rep 659 Posts Drives: 2012 550I - BMS Stg 1 & CAI Join Date: Sep 2013 Location: Texas iTrader: (0)	Can I resuse these type of Spectre filters that I use to run on my N54 on my N63 or are they too large? http://www.e90post.com/forums/showthread.php?t=712499
	Appreciate 0 Quote

11-30-2017, 05:10 PM	#357
Taynice87 New Member 16 Rep 20 Posts Drives: 2014 BMW 550i Gran Turismo Join Date: Sep 2015 Location: Albany, Georgia iTrader: (0)	Hey Im interested very much can't wait till this is out
	Appreciate 0 Quote

12-01-2017, 01:40 PM	#359
Cali_G05 New Member 0 Rep 17 Posts Drives: 14’ 550i m-sport Join Date: Nov 2017 Location: Phillips Ranch, CA iTrader: (0)	Definitely interested in one count me in!
	Appreciate 0 Quote

12-05-2017, 08:15 AM	#360
535_BiTurbo Captain 107 Rep 659 Posts Drives: 2012 550I - BMS Stg 1 & CAI Join Date: Sep 2013 Location: Texas iTrader: (0)
	Appreciate 0 Quote

12-05-2017, 12:49 PM	#361
Simple5 Major 347 Rep 1,397 Posts Drives: 2013 M5 Join Date: Jul 2011 Location: USA iTrader: (8)	Awesome work man. I'll be going to this setup once I put some more miles on my custom panel filters!
	Appreciate 0 Quote

12-07-2017, 12:19 AM	#362
ReyNLyanne Enlisted Member 8 Rep 31 Posts Drives: carbon Black 2014 535i Join Date: Dec 2017 Location: antioch,ca iTrader: (0)	535i fitment Sorry new to forum maybe not on the right thread but do these fit f10 535i?
	Appreciate 0 Quote

02-07-2018, 01:25 PM	#364
ReeferCheefer Private First Class 56 Rep 191 Posts Drives: 135i,335i,335xi,328dx, 535i Join Date: Sep 2014 Location: Chicago iTrader: (1) Garage List 2008 E90 Montego [0.00] 2022 s1000rr [0.00] 2016 S1000RR [0.00] 2011 535i xdrive [0.00]	Any one try these? https://www.armmotorsports.com/BMW-F...n63-intake.htm
	Appreciate 0 Quote

02-07-2018, 09:20 PM	#366
535_BiTurbo Captain 107 Rep 659 Posts Drives: 2012 550I - BMS Stg 1 & CAI Join Date: Sep 2013 Location: Texas iTrader: (0)	there were issues with it popping codes
	Appreciate 0 Quote

02-10-2018, 01:14 PM	#370
AmooManiak Lieutenant Colonel 632 Rep 1,585 Posts Drives: 21 X5 M50i -> M2C -> 21 M5C Join Date: Aug 2016 Location: Illinois iTrader: (0)	How long do you think the install takes? Over an hour? Trying to get a rough estimate of what's involved. thanks!
	Appreciate 0 Quote

02-12-2018, 07:00 PM	#373
535_BiTurbo Captain 107 Rep 659 Posts Drives: 2012 550I - BMS Stg 1 & CAI Join Date: Sep 2013 Location: Texas iTrader: (0)	Does the N63intake setup produce similar vbox gains on the F10 550i as to those produced by MSR intakes on the F80 M4 and F10 M5? "The Dyno has shown 20-40 WHP and torque between my stock M5 and on my fully modded M6 do to being more efficient, and my M6 had BMS filters charcoal filter delete RPI scoops befure intake. The Dyno doesn't show its true potential do to its unconventional design. Everything has been tested from Vbox track and Dyno and proven gains not only on my personal cars but also customers cars as well. Two of my customers had Gruppe M and noticed a huge improvement immediately even before adapting. Vbox gains have proven .5 seconds from 60-130 mph on my completely stock M5 Also track proven on a customers M5 knocked off .5 seconds off the 1/4 and gain 4-5 mph. My M6 world record 10.7 129mph befire intake 11.0 126-127mph These are real and proven tests not estimated guesses."
	Appreciate 0 Quote

02-28-2018, 11:46 AM	#374
535_BiTurbo Captain 107 Rep 659 Posts Drives: 2012 550I - BMS Stg 1 & CAI Join Date: Sep 2013 Location: Texas iTrader: (0)	Updated pics with new filers (Spectre 8132) Last edited by 535_BiTurbo; 03-06-2018 at 09:19 AM..
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search