[Chili Palmer]

If you've followed my thread on needing a Morr wheel (http://f10.5post.com/forums/showthread.php?t=1040256). I am in a bind now - Morr won't allow this outfit to cut me a new wheel so now I am SOL as far as wheels on my car go. Right now it's rolling on the stock 351's, but after having the Morrs on there the 351's just don't cut it.

I'd like to stay with a wheel like a the Morr VS8.2, but I'm having trouble finding a wheel that is similar without looking low budget and there are a lot of those out there. I'd really like to go with a set of HRE P40SC or the 590RS wheels, but $6000 isn't in my budget right now. The HRE flow forms look good, but don't have the concave that I want, they're kind of too flat for me. I found a set of VIP's from a member here that I like, but they are 21's and too wide for my liking - the 21" tire sidewall doesn't allow too much protection for the rim and being that it's wider than the tread area means the sidewall is stretched (not a fan of that look) making the sidewall even narrower.

If you're in a mood to change out your wheels or returning your lease or selling your car and want to pull off your custom wheels keep me in mind.

[CaliE90]

Originally Posted by Chili Palmer

If you've followed my thread on needing a Morr wheel (http://f10.5post.com/forums/showthread.php?t=1040256). I am in a bind now - Morr won't allow this outfit to cut me a new wheel so now I am SOL as far as wheels on my car go. Right now it's rolling on the stock 351's, but after having the Morrs on there the 351's just don't cut it.

I'd like to stay with a wheel like a the Morr VS8.2, but I'm having trouble finding a wheel that is similar without looking low budget and there are a lot of those out there. I'd really like to go with a set of HRE P40SC or the 590RS wheels, but $6000 isn't in my budget right now. The HRE flow forms look good, but don't have the concave that I want, they're kind of too flat for me. I found a set of VIP's from a member here that I like, but they are 21's and too wide for my liking - the 21" tire sidewall doesn't allow too much protection for the rim and being that it's wider than the tread area means the sidewall is stretched (not a fan of that look) making the sidewall even narrower.

If you're in a mood to change out you wheels or returning your lease or selling your car and want to pull off your custom wheels keep me in mind.

May I interest you with some BBS?

http://f10.5post.com/forums/showthread.php?t=1044234

[Chili Palmer]

Nice wheels, too bad they're black - my car's black, that's too much black for me.

Good luck with the sale.

[indy1298]

Are these still for sale?

[CaliE90]

Originally Posted by Chili Palmer

Nice wheels, too bad they're black - my car's black, that's too much black for me.

Good luck with the sale.

alrighty. Just let me know if you change your mind

[Black550]

Jz, I'm interested in your wheels. I sent you a PM.

[MWPos]

I'm helping a friend to sell two wheels...these are OEM, way below retail.
I'm headed up to NORCAL over Thanksgiving...I could get them to you.

http://f10.5post.com/forums/showthread.php?t=1048167

[Chili Palmer]

Thanks, but I'm going the custom route for a more aggressive look.

GLWS

[MWPos]

Understood...best of luck in finding the right wheels!

[Chili Palmer]

Originally Posted by MWPos

Understood...best of luck in finding the right wheels!

Oh, that's easy. I just have trouble justifying the cost of the right wheels.

[MWPos]

Just remind your accountant (my wife is mine) that any money saved above your asset protection allowance allowed by the FAFSA only hurts your opportunity to get need-based financial aid for the kids. Tell her that you will save on the cost of college for the kids by buying the wheels now!

[Chili Palmer]

Originally Posted by Jz

May I interest you with some BBS?

http://f10.5post.com/forums/showthread.php?t=1044234

>>>>> PM Sent <<<<<