|
|
|
2010 2011 BMW 5 Series Forum F10 SA Recommendation - LA / Ventura area |
|
Post Reply |
|
Thread Tools | Search this Thread |
04-03-2013, 11:38 AM | #1 |
First Lieutenant
31
Rep 340
Posts |
SA Recommendation - LA / Ventura area
Hey guys,
Been a BMW owner since 2007 and sadly, I haven't had a good experience with any Service Centers over the years. Who/where do you guys go to that would highly recommend? Can always PM me if you don't want to publicly post. Thanks! Tri Update/Edit: The main reason for this post is my car is currently in service for the "pulling to the right issue". It's a 2013 535i M Sport, and I took delivery on 02/25/13. This issue was apparent on day 2. The service center where the car currently is at isn't able to replicate the problem, and are stating the car behaves normally, and the pulling is due to the "crowned roads". I've politely told them this never happened to my previous BMW's, given I drive on the same roads, and also the problem exists in flat parking lots - but they are still insistent that the car drives straight. I really am just looking for a center where they try to work with you in resolving an issue, instead of the initial reaction to state that you (the client) are wrong in your claims. They are keeping the car overnight and performing an alignment check tomorrow. Will keep you guys updated. Last edited by tdang81; 04-03-2013 at 05:31 PM.. |
04-03-2013, 01:16 PM | #3 | |
First Lieutenant
31
Rep 340
Posts |
Quote:
Haven't tried Century West for service - but looks like I don't need to. Thanks for the feedback! |
|
Appreciate
0
|
04-03-2013, 01:22 PM | #4 |
Brigadier General
406
Rep 3,583
Posts
Drives: 2017 M3
Join Date: Feb 2011
Location: Ventura County, CA
|
Steve Thomas BMW talk to warren.
|
Appreciate
0
|
04-03-2013, 04:16 PM | #6 |
First Lieutenant
31
Rep 340
Posts |
I'll give him a call next time something comes up. Thank you.
A bit a ways from where I am at, but thanks for the suggestion |
Appreciate
0
|
04-29-2013, 07:23 PM | #7 |
First Lieutenant
31
Rep 340
Posts |
Anyone dealt with the "Pulling to the right" issue and got it resolved? If so, could you please PM me the center/SA that you used?
Thanks in advance! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|