2010 2011 BMW 5 Series Forum F10
BMW Garage BMW Meets Register Today's Posts
 

2010 2011 BMW 5 Series Forum F10 BMW 5-Series (F10) Forums General 5-Series Sedan and Wagon (F10 / F11) Forum Remove idrive knob
Post Reply
 
Thread Tools Search this Thread
      06-15-2017, 05:08 PM   #1
fmorelli
Lieutenant
fmorelli's Avatar
United_States
162
Rep
561
Posts

Drives: Atacama Yellow 35i
Join Date: Mar 2016
Location: VA

iTrader: (0)

Remove idrive knob

Anyone know how to remove the iDrive controller knob? I have a new top piece (different graphics than the 4 arrows. I did some google search and saw some "step by step" pictures, but they seems like "here a miracle occurs" in that they don't actually show you how the top of the knob comes off.

Thanks,

Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport.
Appreciate 0
      06-15-2017, 06:43 PM   #2
JMack2688
Private
6
Rep
65
Posts

Drives: 2011 BMW 535xi
Join Date: Oct 2016
Location: PA

iTrader: (0)

I just replaced mine. The top (black piece) you can pry out.
Appreciate 0
      06-15-2017, 07:17 PM   #3
fmorelli
Lieutenant
fmorelli's Avatar
United_States
162
Rep
561
Posts

Drives: Atacama Yellow 35i
Join Date: Mar 2016
Location: VA

iTrader: (0)

Sorry I'm being a bit dense. When you say pry out the black part, are you saying pry it out from the silver ring that surrounds it? It seems like there is a black ring around the black plate, between the plate and silver ring. I've attached a photo ...

Thanks,

Filippo

__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport.
Appreciate 0
      06-15-2017, 07:21 PM   #4
ezaircon4jc
Major General
ezaircon4jc's Avatar
United_States
4484
Rep
5,365
Posts

Drives: 2019 540i M Sport
Join Date: Jan 2015
Location: San Diego

iTrader: (0)

Quote:
Originally Posted by fmorelli View Post
Sorry I'm being a bit dense. When you say pry out the black part, are you saying pry it out from the silver ring that surrounds it? It seems like there is a black ring around the black plate, between the plate and silver ring. I've attached a photo ...

Thanks,

Filippo

The black disc with the arrows pops off. Use a 'fine" flat-head screwdriver to pop off the disc.
Appreciate 0
      06-15-2017, 09:22 PM   #5
fmorelli
Lieutenant
fmorelli's Avatar
United_States
162
Rep
561
Posts

Drives: Atacama Yellow 35i
Join Date: Mar 2016
Location: VA

iTrader: (0)

Got it. Do you insert the flat head inside the black edge beading or outside the edge beading (by silver edge)? I just want to make sure I clearly understand and don't screw up :-D

Thanks,

Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport.
Appreciate 0
      06-15-2017, 11:02 PM   #6
ezaircon4jc
Major General
ezaircon4jc's Avatar
United_States
4484
Rep
5,365
Posts

Drives: 2019 540i M Sport
Join Date: Jan 2015
Location: San Diego

iTrader: (0)

Quote:
Originally Posted by fmorelli View Post
Got it. Do you insert the flat head inside the black edge beading or outside the edge beading (by silver edge)? I just want to make sure I clearly understand and don't screw up :-D

Thanks,

Filippo
For some reason the picture is gone...

If memory serves, closest to the arrows. You should see a small gap.
Appreciate 0
      06-16-2017, 09:36 PM   #7
fmorelli
Lieutenant
fmorelli's Avatar
United_States
162
Rep
561
Posts

Drives: Atacama Yellow 35i
Join Date: Mar 2016
Location: VA

iTrader: (0)

Quote:
Originally Posted by ezaircon4jc View Post
For some reason the picture is gone...

If memory serves, closest to the arrows. You should see a small gap.
Unfortunately I've not had much luck thus far. I can't seem to press anything in the seam without causing damage.

Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport.
Appreciate 0
      06-17-2017, 01:42 PM   #8
JMack2688
Private
6
Rep
65
Posts

Drives: 2011 BMW 535xi
Join Date: Oct 2016
Location: PA

iTrader: (0)

You'll need something thinner. The black part with the arrows separates from the matte chrome ring that surrounds it.
Appreciate 0
Post Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:24 AM.




5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST