Morr MS10 on E93 M3

mlai · 10-10-2012, 08:15 AM

Without further ado.......

datbimmerdoe · 10-10-2012, 08:45 AM

wut did u end up doin 4 the valve stem?

mlai · 10-10-2012, 08:55 AM

Quote:

Originally Posted by the infamous...

wut did u end up doin 4 the valve stem?

Morr gave me very short ones. As for the extra useless hole, I just used the very short stems and let them be.

But turns out those were the least of the problems. Last night when I test drove the car, I heard noises from the wheels when braking. Had the wheels checked at the tyre shop, and found that some of the screws holding the 3pc wheel together wasn't even tight enough. Some of them I can unscrew with my bare hands

So had them retighten with the torque wrench and now no more noise

RC3 · 10-10-2012, 10:12 AM

Quote:

Originally Posted by mlai

But turns out those were the least of the problems. Last night when I test drove the car, I heard noises from the wheels when braking. Had the wheels checked at the tyre shop, and found that some of the screws holding the 3pc wheel together wasn't even tight enough. Some of them I can unscrew with my bare hands

So had them retighten with the torque wrench and now no more noise

Talk about QA/QC. I hope you have no MORR issue for your wheels.

Nice wheels, but I actually like your MS08 better.

mlai · 10-10-2012, 10:58 AM

Quote:

Originally Posted by RC3

Talk about QA/QC. I hope you have no MORR issue for your wheels.

Nice wheels, but I actually like your MS08 better.

So do I

So the MS8s will be going on my new ride

gapth8888 · 10-13-2012, 11:04 PM

Nice Wheel

snj1013 · 10-14-2012, 01:29 PM

Quote:

Originally Posted by mlai

Morr gave me very short ones. As for the extra useless hole, I just used the very short stems and let them be.

But turns out those were the least of the problems. Last night when I test drove the car, I heard noises from the wheels when braking. Had the wheels checked at the tyre shop, and found that some of the screws holding the 3pc wheel together wasn't even tight enough. Some of them I can unscrew with my bare hands

So had them retighten with the torque wrench and now no more noise

That gives you a warm, fuzzy.... Wonder what others steps Morr forgot to do? Inexcusable Quality Control!

///M ARMY · 10-14-2012, 05:46 PM

not bad. I would have gone with more aggressive.

10-10-2012, 08:15 AM	#1
mlai Colonel 166 Rep 2,340 Posts Drives: 650GC/E93M3/Lexus LS600HL Join Date: Jun 2010 Location: Hong Kong iTrader: (0) Garage List 2013 BMW F06 650i G ... [0.00] 2011 BMW M3 Cabriol ... [10.00]	Morr MS10 on E93 M3 Without further ado....... __________________ F06 650i Gran Coupe Ruby Black/Dakota Cinamon- 2012-10-12 Adaptive Drive/IAS/Surround View/Adaptive LED/Comfort Seats/BMW 356 Liquid Black/Michelin PSS 245/35R20-285/30R20 E93 M3 Cabriolet Satin Pearl White/CR - 2012/03/12 Bilstein PSS10/ Michelin PSS 245/35R19-265/35R19 Brembo GT 2011 F10 550i M Sport - Retired
	Appreciate 0 Tweet Quote

10-10-2012, 08:45 AM	#2
datbimmerdoe Lieutenant General 1265 Rep 17,493 Posts Drives: like I'M BOUT THAT LIFE Join Date: Jul 2008 Location: PARADISE aka CANES COUNTRY iTrader: (0)	wut did u end up doin 4 the valve stem? __________________ #datbimmerdoe #thatbimmertho FOLLOW @datbimmerdoe on INSTAGRAM
	Appreciate 0 Quote

10-13-2012, 11:04 PM	#6
gapth8888 New Member 2 Rep 14 Posts Drives: f10 Join Date: Oct 2012 Location: Thai iTrader: (0)	Nice Wheel
	Appreciate 0 Quote

10-14-2012, 05:46 PM	#8
///M ARMY Brigadier General 1002 Rep 3,051 Posts Drives: F90 Join Date: Jul 2012 Location: Cali iTrader: (2)	not bad. I would have gone with more aggressive.
	Appreciate 0 Quote