|03-16-2011, 07:33 PM||#1|
♦ Sonic MS | Forgestar CF5 Rotary Forged Wheels (New for 2011)
1045 West El Camino Real
Mountain View, CA 94040
Presenting the ultra light, yet affordable one piece rotary forged Forgestar CF5 wheels. These wheels are made to order with custom offsets available, to fit your F10 5er perfectly without the need for spacers or fender adjustments.
They are made to clear BBKs standard and utilize a rotary forged inner barrel - the same technology used on Formula 1 and Indy race vehicles. Available in standard and deep concave profiles.
Rotary Forged / Flow Formed Cast - Technical Information
This specialized process begins with a low pressure type of casting and uses a special machine that spins the initial casting, heats the outer portion of the casting and then uses steel rollers pressed against the rim area to pull the rim to its final width and shape. The combination of the heat, pressure and spinning create a rim area with the strength similar to a forged wheel. During Flow Forming, the pressure applied to the cast rim actually changes its mechanical properties, so its strength and impact values become similar to those of a forged rim. That translates to up to 15% less weight when compared to a standard cast wheel. The resulting grain structure within the alloy of the wheel is linear, flowing in a single direction.
Click Here to View Test Reports from Independent Third Party Test Labs
Recommended Fitment for the F10 5er
We also offer full rim and tire packages including OEM TPM sensors. We utilize the Hunter Road Force GSP9700 Balancer and “Touch-less” Auto 34 Mounting Machine to mount and balance your rims and tires safely and effectively, without risking any damage to your new investment.
*Please click on link for more information on the tire, including pricing.
Sumitomo HTR Z III
Hankook Ventus V12
Bridgestone Potenza RE760 Sport
18 inch - $1600/set
19 inch - $1860/set
20 inch - $2560/set
For best pricing and ordering information, please call me at 650.733.6506, email at firstname.lastname@example.org or shoot me a PM.
Last edited by Cal@Sonic MS; 05-18-2011 at 07:31 PM.
|Thread Tools||Search this Thread|