X Pipe inlet diameter size for 535i

Nobleman · 07-15-2012, 10:24 PM

Whats up guys. Im planning to add X Pipe for my Eisenmann exhaust. Planning to cut the stock resonator in the mid section, and weld this magnaflow Tru X Pipe. They have three different inlet diameter sizes. Which are 2.25, 2.5, and 3. I have 535i and not sure which inlet diameter should I go for. If you guys know which diameter I have to use, could you please let me know. Thanks for ur help all.

ceebange061175 · 07-16-2012, 01:25 AM

Watch this vid clip bro! I know ur trying to make it sound louder. This can help ur decision. Which one sounds louder guys??? Any thought ?

LACSTER · 07-16-2012, 01:52 AM

Jung, The stock piping is 2.25

Nobleman · 07-16-2012, 09:39 AM

Bravo!

Thanks Kevin.
Did u get ur rims yet?

Quote:

Originally Posted by LACSTER

Jung, The stock piping is 2.25

Nobleman · 07-16-2012, 09:59 AM

Great compare bro!!! Nice!!!

Quote:

Originally Posted by ceebange061175

Watch this vid clip bro! I know ur trying to make it sound louder. This can help ur decision. Which one sounds louder guys??? Any thought ?

Edman951 · 07-16-2012, 07:37 PM

60mm OD is the pipe diameter according to http://www.realoem.com/bmw/showparts...64&hg=18&fg=10

Nobleman · 07-17-2012, 09:47 AM

Quote:

Originally Posted by Edman951

60mm OD is the pipe diameter according to http://www.realoem.com/bmw/showparts...64&hg=18&fg=10

Thanks Edman951
60mm seems to be 2.25inch. I just order one. Hope the shop can weld it good tho!!!

BigDeep1 · 01-01-2013, 01:47 AM

Quote:

Originally Posted by Nobleman

Thanks Edman951
60mm seems to be 2.25inch. I just order one. Hope the shop can weld it good tho!!!

Any update on cutting out the center resonator and welding on the x-pipe?

Nobleman · 01-01-2013, 12:35 PM

Quote:

Originally Posted by BigDeep1

Any update on cutting out the center resonator and welding on the x-pipe?

I already delete the center resonator and put a straight pipe with eisenmann race. I went with straight pipe instead of xpipe. You can check it out from my thread.

07-15-2012, 10:24 PM	#1
Nobleman First Lieutenant Drives: 2011 535 Xdrive Msport TiAg Join Date: Jan 2012 Location: NJ Edgewater Posts: 301 iTrader: (7)	X Pipe inlet diameter size for 535i Whats up guys. Im planning to add X Pipe for my Eisenmann exhaust. Planning to cut the stock resonator in the mid section, and weld this magnaflow Tru X Pipe. They have three different inlet diameter sizes. Which are 2.25, 2.5, and 3. I have 535i and not sure which inlet diameter should I go for. If you guys know which diameter I have to use, could you please let me know. Thanks for ur help all. Attached Images __________________ Sold- 2011 535 Xdrive Msport TiAg Current- 2012 Audi A4 Quattro White Retired- 2008 535i Sport Jet Black Retired- 2006 335i Sport Jet Black
	Tweet

07-16-2012, 01:25 AM	#2
ceebange061175 Private First Class Drives: f10 535i M-sports Join Date: Nov 2011 Location: Fort Lee NJ Posts: 168 iTrader: (0)	Watch this vid clip bro! I know ur trying to make it sound louder. This can help ur decision. Which one sounds louder guys??? Any thought ? Last edited by ceebange061175; 07-16-2012 at 01:47 AM.

07-16-2012, 07:37 PM	#6
Edman951 Second Lieutenant Drives: F10 550xi, Alpine white Join Date: Nov 2006 Location: Montreal, Quebec Posts: 278 iTrader: (1)	60mm OD is the pipe diameter according to http://www.realoem.com/bmw/showparts...64&hg=18&fg=10 __________________ F10 550i Xdrive M sport, white trade-in 2008 E90 M3

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-16-2012, 01:52 AM	#3
LACSTER Major General Drives: AW F10 & E93 Join Date: Nov 2007 Location: Orange County, Ca Posts: 6,474 iTrader: (57)	Jung, The stock piping is 2.25