Quote:
Originally Posted by BrowBMW
You were hitting 27 lbs in the charge pipe but at the manifold you were only showing 22lbs. You have no throttle plate closure, so I wonder why? Question for your tuner. Maybe you need a 3bar sensor on the manifold too?
Some timing correction on cyl 1 but not bad, your rail pressure was dropping so that means you probably can't turn it up more. Can you run more meth to support rail pressure? You are running 100% correct?
Have you looked into the flex fuel module to run an e mix? Or is this e50 per your tune's name?
For an Xdrive, your Estimated WHP on this pull was 633hp, probably would have been higher if you took it to redline.
Good data there!!!
|
also how are you estimating power?