Quote:
Originally Posted by Double Nickel
What screws are they? Self tappers?
|
For the BMW M Pedals, they attach as follows:
Accelerator pedal are self tappers. Gotta drill pilot holes into the plastic pedal. Then there is also a "full faced" adhesive strip.
Brake pedal is nuts & bolts. Drilling thru the metal brake can be a little tricky to make sure your marks line up as pedal is not flat but curved a bit (and a couple of the holes are very close to the edge, imo). I used a small bit to make pilot hole starters then reamed them out with full sized bit required. Very tight and cramped space to get the tiny nuts started on the threads. I had to hold the nut flush with one finger while driving the bolt with a rachet. Then used needle nose pliers to get a bite and hold when tightening down.