Quote:
Originally Posted by wmg/bmw
What you need is wrong
2x x5.0i intake runners/ turbo inlets. < using the OEM that is already on the car....
2 x MAF housing for a Chevy cruise < looks good
2x 3in 90degree bends < 2x 180 degree, 3" OD
2x 45 degree bends. < 4x 45 degree, 3" OD, 90mm
4x straight couplers < 16x 3" Clamps
Also need 2 x Straight pipes 12"L, 3" OD
|
Quote:
Originally Posted by wmg/bmw
What you need is wrong
2x x5.0i intake runners/ turbo inlets. < using the OEM that is already on the car....
2 x MAF housing for a Chevy cruise < looks good
2x 3in 90degree bends < 2x 180 degree, 3" OD
2x 45 degree bends. < 4x 45 degree, 3" OD, 90mm
4x straight couplers < 16x 3" Clamps
Also need 2 x Straight pipes 12"L, 3" OD
|
No....... you sir are wrong.....I legit just installed this....